Coal Fatality – 2/26/23

On February 26, 2023, a contract miner died while operating a bulldozer. The bulldozer traveled over the edge of an access road and rolled feet down an embankment, ejecting the miner from the operator’s cab. The miner was not wearing a seatbelt.

Best Practices

  • Always wear a seatbelt when operating mobile equipment. Monitor work activities routinely to ensure miners wear seatbelts and follow safe work procedures.
  • Examine ground conditions before beginning work and remain alert as conditions change throughout the shift.
  • Train miners on the equipment they operate, including safe work procedures, and to identify and report hazards.
  • Always be aware of your position relative to roadway edges and benches.

Additional Information

This is the ninth fatality reported in 2023, and the second classified as “Machinery”.

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 2/25/23

On February 25, 2023, a miner drowned when his excavator traveled over a berm into a sediment pond.

Best Practices

  • When working near water, install a combination seat belt cutter and window breaker tool in the operator’s cab of equipment.
  • Keep all exits clear in cabs, including alternate and emergency exits, and make sure the doors and windows open freely before beginning work.

Additional Information

This is the eighth fatality reported in 2023, and the first classified as “Drowning.”

Click here for: Preliminary Report (pdf), Final Report (pdf).

Coal Fatality – 5/16/23

On May 16, 2023, a bulldozer operator died when a spoil pile slid and engulfed the bulldozer he was operating. At the time of the accident, the bulldozer operator was repairing a ramp used to access water pumps in the pit.

Best Practices

  • Establish and follow ground control plans that are consistent with prudent engineering design for the safe control of all highwalls, pits, and spoil banks.  
  • Examine highwalls, spoil banks, and ground that slope into working areas after every rain, freeze, or thaw before work in such areas.
  • Stay clear of potentially unstable areas.  Correct unsafe ground conditions in the affected area.
  • Equip bulldozers with two-way communication systems, high strength glass, and an SCSR for breathable air when working on material that has the potential to slide or engulf mobile equipment.

Additional Information

This is the 19th fatality reported in 2023, and the first classified as “Falling, Rolling, or Sliding Rock or Material of Any Kind.” 

Click here for: Preliminary Report (pdf)

MNM Fatality – 5/2/23

On May 2, 2023, a miner died when he was struck by a mobile radial stacker conveyor.

Best Practices

  • Provide safe access to all working places by identifying hazards around belt conveyor systems.
  • Deenergize, lock out, tag out, and block equipment from hazardous motion before performing maintenance or repairs.
  • Provide remote e-stops to allow for safe access around moving equipment.
  • Train miners to work around moving equipment, including the hazards associated with the work to be performed. 

Additional Information

This is the 18th fatality reported in 2023, and the fourth classified as “Powered Haulage.”

Click here for: Preliminary Report (pdf), Final Report (pdf).

Coal Fatality – 4/20/23

On April 20, 2023, a contract laborer died while removing the side plate off a shaker screen. The unsupported side plate fell over and struck him.

Best Practices

  • Block machinery components against motion before beginning maintenance or repairs.
  • Ensure blocking material is installed correctly and is of adequate size and strength to support and stabilize the load.
  • Ensure miners position themselves in a safe location and away from potential pinch point areas.
  • Train miners in safe work procedures and hazard recognition. Monitor personnel routinely to ensure they follow safe work procedures.

Additional Information

This is the 17th fatality reported in 2023, and the sixth classified as “Machinery.”

Click here for: Preliminary Report (pdf)

MNM Fatality – 4/9/23

On April 9, 2023, a miner died while mounting off road truck tires on rims.  The miner was in the process of mounting a tire on its rim when another tire’s outer lock ring dislodged, became airborne and struck the victim in the head.

Best Practices

  • Use a tire safety cage (or other tire restraint device) when inflating a truck tire that is not on the truck.  Stand away from the inflating tire and out of the wheel and air blast trajectory during the inflation process.
  • Check tires and rims for damage and defects before performing work.
  • Before repairing tires, completely deflate the tires by removing the valve core and checking the valve stem to make sure it’s clear. 
  • Follow the manufacturer’s procedures and make sure tire and rim components are compatible.
  • Train miners who service tire and rim components. 

Additional Information

This is the 15th fatality reported in 2023, and the fifth classified as “Machinery.”

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 3/15/23

On March 15, 2023, a miner drowned when the ground sloughed causing the excavator he was operating to topple into a water-filled pit.  The excavator became submerged in approximately 25 feet of water.

Best Practices

Mine operators should:
•    Install berms at the edge of the working surface so machinery can operate a safe distance from the water.
•    Evaluate ground conditions and mining methods before operating equipment near water.
•    Examine work areas and equipment and correct unsafe conditions.
•    Task train equipment operators on the operation of machinery.

Additional Information

This is the 12th fatality reported in 2023, and the fourth classified as “Machinery.”

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 3/9/23

On March 9, 2023, a truck driver died when the tractor’s rear wheels ran over him.  A front-end loader struck the tractor-trailer from behind, causing the tractor to move forward.

Best Practices

  • Do not leave mobile equipment unattended unless the transmission is in the park position, and parking brakes of all units in a combination vehicle are set.
  • Chock or turn wheels of mobile equipment into a bank when parked on a grade.
  • Never position yourself in hazardous areas around mobile equipment.

Additional Information

This is the 11th fatality reported in 2023, and the second classified as “Powered Haulage.”

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 3/1/23

On March 1, 2023, a miner died when the bulldozer he was operating went over an embankment, ejecting him from the operator’s cab.

Best Practices

Operators should train miners to:

  • Wear a seat belt while operating mobile equipment. 
  • Examine ground conditions before beginning work in an area and as ground conditions warrant during the work shift.  
  • Operate equipment safely, and to identify and report hazards.
  • Be aware of their position relative to edges of roadways and benches.

Additional Information

This is the tenth fatality reported in 2023, and the third classified as “Machinery.”

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 1/17/23

On January 17, 2023, a miner was fatally injured when his personal car collided with a customer truck. Both vehicles were traveling toward each other in opposite directions on an icy mine access road.

Best Practices

Operators should:

  • Clear roadways of ice and snow or require traction devices to assure safe operation of mobile equipment.
  • Alert drivers to reduce speed on wet or icy roads. 
  • Maintain control of equipment while it is in operation.

Additional Information

This is the second fatality reported in 2023, and the first classified as “Powered Haulage.”

Click here for: Preliminary Report (pdf), Final Report (pdf).