Month: June 2014

Fatality #6 for Coal Mining 2014

renewcomerLeave a comment

ftl2014c06On Wednesday, May 14, 2014, a 25-year-old roof bolter operator with 1 year and 44 weeks mining experience was killed when he was pinned between a roof-bolting machine and the coal rib. The victim and another roof bolter operator were in the process of tramming the roof-bolting machine in the outby direction in the No. 3 entry on the No. 1 Longwall Tailgate. They had trammed the roof bolting machine from the 151 crosscut to approximately the 89 ½ crosscut when the accident occurred. The victim was found on the left side of the roof-bolting machine between the machine and the coal rib.

Best Practices
  • Ensure everyone, including the equipment operator, is outside the machine-turning radius before starting or moving equipment.
  • Walk behind moving mobile equipment when traveling in the same entry and maintain a safe distance between yourself and any equipment that is moving.
  • Never position yourself in an area or location where equipment operators cannot readily see you.
  • Develop policies and procedures for starting and tramming self-propelled equipment.  Train all miners that would be exposed to the hazards.
  • When moving self-propelled machines where the left and right traction drives are operated independently, low tram speed should be used.
  • Never defeat any of the machine controls.  Ensure that all operating devices function as designed.
  • Install and maintain proximity detection systems to protect personnel and eliminate accidents of this type. See the proximity detection single source page on the MSHA website.

Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf).

Fatality #4 & #5 for Coal Mining 2014

renewcomerLeave a comment

ftl2014c0405On Monday, May 12, 2014, a 48-year-old continuous mining machine operator with 26 years of mining experience, and a 46-year-old mobile roof support operator/roof bolter with 3½ years of mining experience, were fatally injured as a result of a coal rib burst. The section crew was retreat mining in the #6 entry of the 4 East Mains Panel. They were mining the second lift of the left pillar block when the accident occurred.

Best Practices
  • Conduct frequent and thorough examinations of the roof, face, and ribs.  Be alert for changing conditions.  When hazardous conditions are detected, danger off access to the area until it is made safe for work and travel.
  • Ensure that the approved roof control plan support provisions are suitable for the geological conditions at the mine and that the plan is followed.
  • Train all miners in the requirements of the approved roof control plan and instruct miners to follow the plan at all times.
  • Ensure that the pillar dimensions and the mining method are suitable for the conditions, and that roof and rib control methods are adequate for the depth of cover.  Consider the potential effects of any mines above or below the active workings.
  • Develop a map of geological features and unusual conditions in order to develop the best mining plan that addresses the potentially adverse roof and rib conditions that may be present.

Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf).

Fatality #10 for Metal/Nonmetal Mining 2014

renewcomerLeave a comment

ftl2014m10
On April 28, 2014, a 53-year-old miner with 32 years of experience was killed at an underground gold mine. The victim was drilling with a jackleg drill when his clothing became entangled in the drill steel of the machine.
Best Practices

  • Ensure that persons are trained, including task-training, to understand the hazards associated with the work being performed.
  • Establish and discuss safe work procedures before beginning work. Identify and control all hazards associated with the work to be performed and use methods to properly protect persons.
  • Conduct work place examinations before beginning any work.
  • Do not place yourself in a position that will expose you to hazards while performing a task.
  • Stop the drill rotation when performing tasks near the rotating steel.
  • Provide safe routing of hoses and cables so they are not close to the rotation of the drill.
  • Do not assign a person to work alone in areas where hazardous conditions exist that would endanger his or her safety.
  • Do not wear loose fitting clothing when working around drilling machinery.
  • Keep work areas clean and free of tripping hazards.

Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf), Overview (powerpoint), Overview (pdf).

April 2014 Impact Inspections

renewcomerLeave a comment

MSHA-logoThe U.S. Department of Labor’s Mine Safety and Health Administration announced that federal inspectors issued 147 citations and 15 orders during special impact inspections conducted at 12 coal mines and four metal and nonmetal mines in April.

The monthly inspections, which began in force in April 2010 following the explosion at the Upper Big Branch Mine, involve mines that merit increased agency attention and enforcement due to their poor compliance history or particular compliance concerns.

Click here for: MSHA report with spreadsheet (pdf).