June 2014 Impact Inspections

MSHA-logoThe U.S. Department of Labor’s Mine Safety and Health Administration today announced that federal inspectors issued 186 citations, 25 orders and one safeguard during special impact inspections conducted at 11 coal mines and two metal and nonmetal mines in June.

The monthly inspections, which began in force in April 2010 following the explosion at the Upper Big Branch Mine, involve mines that merit increased agency attention and enforcement due to their poor compliance history or particular compliance concerns.

Since April 2010, MSHA has conducted 780 impact inspections and issued 12,627 citations, 1,170 orders and 54 safeguards.

Click here for: MSHA report with spreadsheet (pdf).

Fatality #8 for Coal Mining 2014

ftl2014c08On Monday, June 23, 2014, at approximately 7:35 p.m., a 58–year-old truck driver, with 5 years of mining experience, was killed when the haul truck he was operating traveled through a berm and descended approximately 75 feet into a spoil “V.”

Best Practices
  • Maintain control of equipment at all times during operation.
  • Ensure seat belts are provided, maintained, and worn at all times when equipment is in operation.  Incorporate engineering controls that require seat belts to be properly fastened before equipment can be put into motion.
  • Conduct pre-operational checks to identify and fix any defects that may affect the safe operation of equipment before it is placed into service.
  • Know the truck’s capabilities, operating ranges, load limits and safety features.
  • Provide and maintain adequate berms on the banks of roadways where a drop-off exists.
  • Ensure all grades and haulage roads are appropriate for the haulage equipment being used.
  • Train miners to understand the hazards associated with the work being performed.
  • Monitor work habits routinely and examine work areas to ensure that safe work procedures are being followed.

Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf).

Fatality #7 for Coal Mining 2014

ftl2014c07On Wednesday, June 4, 2014, a 25-year-old contract equipment operator with 24 weeks of experience was killed when he was crushed between the hood and frame of an impact crusher.  The victim had just finished clearing a large rock from the crusher area when the accident occurred.

Best Practices
  • Establish policies and procedures for safely clearing plugged material in a feeder hopper or crusher.
  • Consult and follow the manufacturer’s recommended safe work procedures for conducting the task.
  • Ensure that persons are task trained and understand the hazards associated with the work being performed.
  • De-energize and lock-out/tag-out all power sources before working on equipment.
  • Ensure moving parts on machinery are blocked against motion before beginning maintenance or repairs.
  • Ensure that blocking material is competent, substantial, and adequate to support and stabilize the load.
  • Maintain equipment in safe working condition.  Ensure safety devices are working properly.
  • Do not place yourself in a position that will expose you to hazards.
  • Monitor all personnel, with an emphasis on miners new to a task, routinely to determine that safe work procedures are followed.

Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf).