On August 9, 2016, a 33 year old Leadman Contractor, with 4 years of experience, was killed at a cement plant loadout. The victim was attempting to replace the lift cable pulleys on the barge loadout chute, when the anchor point for the temporary rigging separated from the loadout chute and it unexpectedly fell. The falling loadout chute caused the lift cables to tighten and the lift cables pinned the victim to the loadout chute causing fatal injuries.
Best Practices
- Establish and discuss safe work procedures before beginning work. Identify and control all hazards associated with the work to be performed and the methods to properly protect persons. Consult and follow the manufacturer’s recommended safe work procedures for the maintenance task.
- Task train all persons to recognize all potential hazardous conditions and to understand safe job procedures for elimination of the hazards before beginning work.
- Examine work areas during the shift for hazards that may be created as a result of the work being performed. Monitor persons routinely to determine safe work procedures are followed.
- Conduct a complete pre-operational inspection of equipment that includes checking winches and cables.
- Position yourself in areas where you will not be exposed to hazards resulting from a sudden release of energy. Be aware of your location in relation to machine parts that can move.
Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf), Overview (pdf).
On Friday, September 23, 2016, a 46-year-old miner was fatally injured in a vehicle accident that occurred along a portion of a mine’s access/haul road. The victim (passenger) and a coworker (driver) were traveling down an inclined portion of the road when the driver apparently lost control of the pickup truck, causing it to strike the road berm and roll over in the roadway.
On Friday, July 29, 2016, a 58-year-old miner with 40 years of mining experience sustained fatal injuries when an ignition occurred in the shaft he and another miner were working above. Two miners were welding threaded blocks to secure guarding around the drive-shaft between a motor and dewatering pump. Methane ignited within the shaft, and the victim was in the direct line of the ignition force. On August 4, 2016, the victim died from the injuries received during the accident.
On July 25, 2016, a 59 year old Excavator Operator, with 17 years of experience, was killed at a limestone quarry. Prior to the accident, the victim was loading shot rock into haul trucks. While waiting for the haul trucks to return, the victim was separating out over sized rocks when the cab of his excavator was struck by falling material from the highwall.
On June 27, 2016, a 61-year old Mine Superintendent, with 24 years of experience, was killed at a limestone quarry. The victim was building a ramp to the lower bench, was positioning his haul truck to dump a load of material near the edge of a highwall, and rolled backwards over the 90 foot highwall.
On June 3, 2016, a 24-year old haul truck operator, with 9 months of experience, and a 56-year old hydraulic excavator operator, with 6 years of experience, were killed at a sand and gravel operation. The two miners were working in a pit next to an abandoned roadway embankment, which partially bound an old pit. Waste clay and sand had been placed in the old pit for reclamation purposes. The embankment failed and the tailings and slurry engulfed both miners.
On May 10, 2016, a 46-year old maintenance man with 6 years of experience was fatally injured at a cement plant. The victim went to the top of the slurry tank to start the rake system. He fell 50 feet through a 3-foot by 4-foot opening in the walkway into the empty slurry tank below.
On April 11, 2016, a 61-year old dozer operator with 18 years of mining experience was fatally injured at a surface titanium ore mine. He had been leveling the haul roads into the pit with the dozer and was found lying approximately 30 feet in front of the dozer.
On April 9, 2016, a 25-year old plant operator with 4 years of mining experience was fatally injured at a surface copper ore mine. He was found unresponsive, kneeling with his face against a stainless steel flange that was connected to a high-density polyethylene pipe. The victim appeared to have received an electrical shock.
On March 22, 2016, a 42-year old lead man with 6 years of mining experience was fatally injured at a surface limestone mine when he was struck by fly rock from blasting operations. The lead man was parked in his pickup truck at a location to prevent others from accessing the blasting site. He was approximately 1,200 feet from the blast area.