Surface

MNM Fatality – 12/13/21 Surface

renewcomerLeave a comment

On December 13, 2021, a customer truck driver (victim) stopped at a designated tarping area and was assisting another driver with a rear trailer indicator light.  The victim’s truck moved forward and pinned him against the back of the other driver’s truck.

Best Practices: 

  • Do not leave mobile equipment unattended unless the transmission is in the park position, the parking brake is set, and the trailer brakes are engaged.
  • Block, or secure from movement, mobile equipment parked on a grade.
  • Never position yourself in hazardous areas around mobile equipment parked on a grade that is not blocked or secured from movement.
  • Train customer truck drivers on site-specific hazards.

Additional Information: 

This is the 37th fatality reported in 2021, and the 17th classified as “Powered Haulage.”

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 12/3/21

renewcomerLeave a comment

On December 3, 2021, a miner was fatally injured when he became entangled in the return idler on the belt conveyor under a portable crusher plant. 

Best Practices: 

  • Before performing maintenance and repair work near belt conveyors:
    • Remove power from the belt drive.
    • Securely block equipment against hazardous motion in accordance with manufacturer’s instructions.
  • Guard moving machine parts to protect miners from contacting moving parts.
  • Provide and maintain a safe means of access to all working places.
  • Conduct thorough examinations of equipment. Report defects and do not work in unsafe conditions.
  • Train miners to assess risks and control hazards before beginning work on belt conveyors.

Additional Information: 

This is the 33rd fatality reported in 2021, and the 16th classified as “Powered Haulage.”

Click here for: Preliminary Report (pdf), Final Report (pdf).

Coal Fatality – 1/11/22

renewcomerLeave a comment

On January 11, 2022, a 32 year-old miner died while driving on a mine road when a tree fell from a highwall onto the cab of his pickup truck.

Best Practices: 

  • Examine highwalls frequently and from as many perspectives as possible (bottom, sides, and top/crest).  Look for signs of instability such as cracks, sloughing, loose ground, and for fall of material hazards such as large trees and rocks.
  • Train all miners to recognize hazardous highwall conditions.
  • Conduct additional examinations as conditions warrant, especially during periods of changing weather conditions.
  • Clear loose or potentially hazardous material from near the edge of highwalls and slopes, especially when persons will work or travel below.
  • Develop and follow a ground control plan that addresses all potential hazards.

Additional Information: 

This is the third fatality reported in 2022 and the first classified as “Falling, Rolling, or Sliding Rock or Material of Any Kind.” 

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 12/6/21

renewcomerLeave a comment

On December 6, 2021, a miner was fatally injured while he was working in a pan feeder under a chute.  While attempting to remove angle iron that blocked the chute’s gate from closing, he was engulfed by material that fell from a surge pile above the chute.  The victim died from his injuries on December 10, 2021.

Best Practices: 

  • Do not allow miners to travel on or below material that is on or above the sides of a bin, hopper, or chute.
  • Provide mechanical devices or other effective means to protect miners from entrapment by caving material.
  • Provide and maintain a safe means of access for all working places.
  • De-energize, lock out, tag out, and block machinery or equipment against hazardous motion before performing repairs or maintenance.
  • Examine work areas and equipment.  Correct defects, or report them to the operator.
  • Train miners to perform their assigned tasks safely.

Additional Information: 

This is the 35th fatality reported in 2021, and the second classified as “Confined Space.”

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 11/17/21

renewcomerLeave a comment

On November 17, 2021, an 18 year-old* customer truck driver with no mining experience* was electrocuted after the tarping mechanism on the trailer contacted a high-voltage overhead power line at a mine with 10 employees*.  While exiting the cab of the truck, the victim contacted the energized truck and received a nonfatal electrical shock.  When he tried to reenter the cab of the truck, he was electrocuted.

Best Practices: 

  • Construct roadways to provide adequate width and clearance between mobile equipment and energized high-voltage power lines, as required by the National Electrical Safety Code.  Evaluate clearances periodically to account for changing physical and environmental conditions.
  • Provide and maintain a safe location for truck drivers to tarp their loads.
  • Check for overhead hazards when raising and lowering truck beds and tarps.
  • If your vehicle contacts an energized power line:
    • Stay in your vehicle.
    • Immediately call for help on a mobile phone or radio.
    • If staying in the vehicle is unsafe, jump away from the vehicle without contacting the vehicle and the ground at the same time.  Once on the ground, hop away from the power line for at least 40 feet.
  • Post readily visible warning signs or signals when overhead hazards exist.

Additional Information: 

This is the 32nd fatality reported in 2021, and the first classified as “Electrical.” (*details added by safeminers.com from MSHA data.)

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 10/20/21

renewcomerLeave a comment

On October 20, 2021, a 50-year-old mechanic with 12 years of experience was fatally injured at a mine with 10 employees* when he was struck by the bucket of an excavator while assisting in repositioning a hopper.

Best Practices: 

  • Never position yourself between mobile equipment and a stationary object.
  • Do not work in pinch points where inadvertent movement could cause injury.
  • Carefully inspect and secure the pins in an excavator’s bucket before each use.
  • Before beginning work, analyze all tasks, establish safe work procedures, train miners, and eliminate hazards.  Be alert for hazards that may be created while the work is performed.
  • Identify and apply methods to protect personnel from hazards associated with the work performed.
  • Monitor all employees to ensure safe work procedures, including safe work positioning, are followed.

Additional Information: 

This is the 30th fatality reported in 2021, and the 5th classified as “Machinery” (*details added by safeminers.com from MSHA data.)

Click here for: Preliminary Report (pdf), Final Report (pdf).

Coal Fatality – 10/19/21

renewcomerLeave a comment

On October 19, 2021, a 58-year-old mechanic with 17 years of experience was fatally injured when the articulated haul truck bed collapsed on him while he performed maintenance on the truck on the surface at an underground mine Ohio with 10 employees*.

Best Practices: 

  • Securely block from motion machinery or equipment that has been raised, and properly use mechanical blocking devices.  Ensure that blocking material is competent, substantial, and adequate to support and stabilize the load.
  • Position yourself in a safe location and away from potential “red-zone” areas where you can be injured.  Observe and follow all warning labels and signs on equipment.
  • Never work under a load that is unsupported or inadequately supported, and never depend on hydraulics to support a load.
  • Outfit haul trucks with a dump box lock bar that mechanically blocks the bed from coming down.
  • Develop and follow safe work procedures.
  • Always consult and follow the manufacturer’s recommended safe work procedures for the maintenance task.

Additional Information: 

This is the 29th fatality reported in 2021, and the 3rd classified as “Falling, Rolling or Sliding Rock/Material.” (*details added by safeminers.com from MSHA data.)

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 10/1/21

renewcomerLeave a comment

On October 1, 2021, a 25-year-old Plant Operator with 4 years and 11 weeks experience* was fatally injured at a mine with 3 employees* when he entered a surge bin used as a feed hopper and was engulfed by material.

Best Practices: 

  • Design surge bins and feed hoppers to prevent blockages.  Equip bins and hoppers with mechanical devices or other effective means of handling material, so miners are not required to enter or work inside bins and hoppers.
  • Provide a safe means of access that allows miners to conduct tasks, such as removing large rocks and other material, safely.
  • Ensure handrails and gates are substantially constructed, properly secured, and free of defects.
  • Don’t stand on material stored in bins.  Material stored in a bin can bridge over the hopper outlet, creating a hidden void beneath the material’s surface.
  • Establish policies and procedures to remove blockages in bins and hoppers safely.  Train and ensure miners follow these policies and procedures.
  • Wear an appropriate safety harness, lanyard, and lifeline, and make sure these are maintained, in good condition, and securely anchored.  Assign another miner to constantly monitor and adjust the lifeline, as needed.

Additional Information: 

This is the 28th fatality reported in 2021, and the third classified as “Handling Material.” (*details added by safeminers.com from MSHA data.)

Click here for Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 9/14/21

renewcomerLeave a comment

On September 14, 2021, a 70 year old* individual with no mining experience* was fatally injured at a mine with 3 employees* when an excavated trench collapsed and engulfed him.  The victim was prospecting for gold inside the trench with a metal detector when the trench collapsed.

Best Practices: 

  • Stay clear of potentially unstable areas. Do not enter trenches if the trench walls are not properly supported for the full height or sloped to a safe angle.
  • Do not abandon trenches or excavations without removing the potential of collapse by filling or sloping the walls to a stable angle.
  • Carefully examine ground conditions before performing tasks near excavated embankments, trenches, or ditches.
  • Follow OSHA Trenching and Excavation Safety Guidelines located at https://www.osha.gov/sites/default/files/publications/osha2226.pdf
  • Train miners about the inherent dangers of trenching work.
  • Keep visitors within sight and sound of a responsible person.

Additional Information: 

The information provided in this notice is based on preliminary data only and does not represent final determinations regarding the nature of the incident or conclusions regarding the cause of the fatality. (*details added by safeminers.com from MSHA data.)

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 9/21/21

renewcomerLeave a comment

On September 21, 2021, a 68-year-old contract truck driver with 20 years of experience was fatally injured while operating a haul truck.  The victim was found lying in front of his truck near the edge of a haul road.  The truck was upright and in the opposite direction of the expected route of travel.

Best Practices: 

  • Establish a site traffic plan to include traffic routes, speed limits, and access points.  Train miners to follow all traffic controls.
  • Conduct pre-operational examinations to identify and repair defects that may affect the safe operation of equipment before placing equipment into service.
  • Operate mobile equipment at speeds consistent with conditions of roadways, grades, curves, and traffic.
  • Maintain control while operating mobile equipment.  Never exceed a vehicle’s design capabilities, operating ranges, load limits, and safety features.
  • Always wear a seat belt when operating mobile equipment.
  • Never exit a moving vehicle.  Remain in the seat with your seat belt secured.

Additional Information: 

This is the 27th fatality reported in 2021, and the twelfth classified as “Powered Haulage.”

Click here for: Preliminary Report (pdf), Final Report (pdf).