Safety Materials

Time for a Hazcom Refresher

renewcomerLeave a comment

Even if you’re at home it could be time for a refresher on how to use chemicals safely… or maybe especially if you’re home. Here’s a timely one on safely using cleaners and disinfectants. Once we return to work there will have to be an increase in use of them.

Follow the basic warnings provided in the graphic above, but more directly read the label, SDS (if you’re at work, though you can probably find one if you aren’t), and any other reliable materials you can find. Beware of alternate uses or combinations you might find recommended online. Remember, these are helpful, but powerful chemicals.

You can read the CDC technical report here.

Construction Stand-Down

renewcomerLeave a comment

Struck-by incidents are a leading cause of death among construction workers,[1]  and since 1992 the leading cause of nonfatal injuries in the construction industry.[2] According to OSHA, the four most common struck-by hazards are being struck-by a flying, falling, swinging, or rolling object. The NORA Construction Sector Council is undertaking a number of initiatives to increase awareness of struck-by hazards and ways to prevent them, including developing this online resource and launching a National Stand-Down to Prevent Struck-by Incidents.

Great graphics and resources to use anytime here.

Electro-Hydraulic Lifts Alert

renewcomerLeave a comment

Damaged or defective welds on aerial lifts have caused several fatalities in the mining industry.

  1. A mechanic died while being lowered in an electro-hydraulic aerial lift. A weld splice fractured on a recently repaired arm of the lift, causing the arm to strike the victim in the head (Figure 1). The weld failed because of poor weld quality from an improper repair.
  2. A welder died while being lowered in an electro-hydraulic aerial lift when the lift arm catastrophically fractured at a critical weld connecting the arm support to its lift cylinder (Figure 2). Undetected cracks existed in the weld and the surrounding metal prior to failure.

Best Practices to Prevent the Mechanical Failure of Welded Connections
Prevent accidents by following proper welding procedures and performing regular inspections for damages or defects.

  • Only qualified welders should perform all welding.
  • Determine the service/fatigue life of mechanical systems or parts by consulting with the manufacturer.Inspect welds following installation and repairs, and periodically during service life.Train users in the proper operation of lifts – including not exceeding their design capacity.
  • Routinely examine metal components for signs of weakness, corrosion, fatigue cracks, bends, buckling, deflection, missing connectors, etc.
  • Use nondestructive test methods to detect cracks that may be indistinguishable to the eye.
  • Take cracked mechanical components out of service immediately. Small cracks can quickly grow and lead to catastrophic fracture.

Download a pdf of the alert Here.

OSHA’s Winter Weather Resources

renewcomerLeave a comment

Outdoor work requires proper preparation, especially in severe winter weather conditions. Although OSHA does not have a specific standard that covers working in cold environments, employers have a responsibility to provide workers with employment and a place of employment which are free from recognized hazards, including winter weather related hazards, which are causing or are likely to cause death or serious physical harm to them (Section 5(a)(1) of the Occupational Safety and Health Act of 1970). Employers should, therefore, train workers on the hazards of the job and safety measures to use, such as engineering controls and safe work practices, that will protect workers’ safety and health.

Click Here to go to OSHA’s Winter Weather page.

Drowsy Driving Prevention Week

renewcomerLeave a comment
Get infographic and other materials here.

To bring heightened awareness to the perils of driving while sleep-deprived, the National Sleep Foundation declares November 3-10, 2019 as Drowsy Driving Prevention Week ®. The Foundation’s annual outreach effort aims to reduce the number of drivers who decide to drive sleep-deprived — responsible for more than 6,400 U.S. deaths annually — through accessible research and communications tools.

A poll commissioned by the National Sleep Foundation (NSF) shows that a total of 97% of those polled see drowsy driving as a threat to safety, with more than 68% considering it to be a major threat. Furthermore, three in 10 Americans reported not knowing how many hours they could be awake without sleep and still drive safely. These findings highlight the need for public education on how to assess one’s alertness and risk of driving while drowsy.

MNM Examination of Working Places

renewcomerLeave a comment
Click here to download a sample workplace exam form with the updated rule on it.

On September 30, 2019 MSHA published the latest revision of the MNM Examination of Working Places rule which changes the rule back to the originally published rule of January 23, 2017. A court ruled that changes to the published rule between then and when it went into effect in June of 2018 lessened the protection of the original rule which violates the “no-less protection” requirement of 101(a)(9) of the Federal Mine Safety and Health Act of 1977.

The reinstated rule goes into effect immediately and says:

(a) A competent person designated by the operator shall examine each working place at least once each shift before miners begin work in that place, for conditions that may adversely affect safety or health.

(1) The operator shall promptly notify miners in any affected areas of any conditions found that may adversely affect safety or health and promptly initiate appropriate action to correct such conditions.

(2) Conditions noted by the person conducting the examination that may present an imminent danger shall be brought to the immediate attention of the operator who shall withdraw all persons from the area affected (except persons referred to in section 104(c) of the Federal Mine Safety and Health Act of 1977) until the danger is abated.

(b) A record of each examination shall be made before the end of the shift for which the examination was conducted. The record shall contain the name of the person conducting the examination; date of the examination; location of all areas examined; and description of each condition found that may adversely affect the safety or health of miners.

(c) When a condition that may adversely affect safety or health is corrected, the examination record shall include, or be supplemented to include, the date of the corrective action.

(d) The operator shall maintain the examination records for at least one year, make the records available for inspection by authorized representatives of the Secretary and the representatives of miners, and provide these representatives a copy on request.

MSHA Fire Alert

renewcomerLeave a comment

In the ten months since early September 2018, MSHA has documented nine equipment fires involving Hitachi excavators and shovels and Caterpillar haul trucks, front end loaders and dozers. On September 7, 2018, a miner received fatal burn injuries when a fire occurred on a haul truck and the manually-activated fire suppression system did not function when activated. The remaining eight equipment fires were all reported as non-injury.

Access MSHA’s alert here (pdf).

PLAN for Safe and Sound Week

renewcomerLeave a comment

Safe + Sound Week is a nationwide event being held August 12 – 18 that recognizes the successes of workplace health and safety programs. Successful safety and health programs can proactively identify and manage workplace hazards before they cause injury or illness, improving sustainability and the bottom line. Participating in Safe + Sound Week can help get your program started, energize an existing one, or provide a chance to recognize your safety successes. Click HERE for more. – OSHA