Copper

Fatality #1 for Metal/Nonmetal Mining 2010

renewcomerLeave a comment

On January 9, 2010, a 20 year-old contractor laborer with 21 weeks of experience was fatally injured at a copper operation. Two track excavators were being used to place a 400-foot long section of 24-inch diameter plastic pipe into a pond. To facilitate the installation process, the pipe was placed on top of an adjacent section of pipe that was previously placed on the plastic lining of the pond. During installation, the pipe being installed misaligned and the victim and two coworkers attempted to remove the end of this pipe from the top of the existing pipe. At that time, the end of the pipe shifted, hit a coworker, and then struck the victim. The victim fell to the ground and the pipe landed on him. The coworker was not injured.

Best Practices

  • Task train all persons prior to performing any work.
  • Always stay clear of suspended loads.
  • Use taglines of sufficient length to adequately protect persons from potential hazards.

Click here for: MSHA Investigation Report(pdf), Overview(powerpoint), Overview(pdf), Spanish Fatalgram(doc)

Fatality #16 for Metal/Nonmetal Mining 2009

renewcomerLeave a comment

On September 27, 2009, a 28 year-old truck driver with 2 years of experience was fatally injured at a copper operation. He was operating a 240-ton haul truck that left the haul road and climbed a berm, causing it to overturn and land on the haul road. The victim, who was not wearing a seat belt, fell from the cab of the truck.

Best Practices

  • Always wear a seat belt when operating a haul truck or mobile equipment.
  • Monitor employees regularly to ensure seat belts are worn when operating mobile equipment.
  • Maintain control and stay alert when operating mobile equipment.
  • Conduct pre-operational checks to identify and correct any defects that may affect the safe operation of self-propelled mobile equipment.

Click here for: MSHA Investigation Report(pdf), Overview(powerpoint), Overview(pdf)