Dimension Stone

Fatality #24 for Metal/Nonmetal Mining 2010

renewcomerLeave a comment

On December 29, 2010, a 41 year- old laborer with 4 years of experience died at a dimension stone operation. The victim was replacing a hydraulic lift arm cylinder on a skid steer loader. The lift arms suddenly lowered, pinning him against the frame of the machine.

Best Practices

  • Establish safe work procedures and identify and remove hazards before beginning repair or maintenance tasks. Follow the equipment manufacturer’s procedures for the work being performed to ensure that all hazards have been addressed.
  • Train persons to recognize the hazards associated with performing repair or maintenance tasks.
  • Prior to performing repair or maintenance tasks, turn the power off and block any raised component against accidentally lowering.
  • Assign a sufficient number of persons to repair or maintenance tasks to ensure the tasks can be safely performed.
  • Do not place yourself in a position that will expose you to hazards while performing repair or maintenance tasks.
  • Monitor personnel routinely to determine that safe work procedures are followed.

Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf), Overview(powerpoint), Overview (pdf).

Fatality #17 for Metal/Nonmetal Mining 2010

renewcomerLeave a comment

2010 MNM fatality #17On October 7, 2010, a 72 year-old dozer operator with 20 years of experience died at a dimension stone operation. The victim dismounted the dozer he was operating and walked near a haul truck that struck him.

Best Practices

  • Train all persons to stay clear of mobile equipment.
  • Be aware of the location and traffic patterns of mobile equipment in your work area.
  • Never approach mobile equipment until you communicate with mobile equipment operators and receive confirmation from the operator indicating awareness of your presence.
  • Use radios to communicate when visual contact can’t be maintained.
  • Wear high visibility clothing when working around mobile equipment.
  • Install “rear viewing” cameras and proximity detection devices on mobile equipment.
  • Before moving mobile equipment, look in the direction of travel, use all mirrors, cameras, and proximity detection devices to ensure no persons are in the intended path.
  • Sound the horn to warn persons of intended movement and wait to give them time to move to a safe location.

Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf), Overview (powerpoint), Overview (pdf).

Fatality #13 for Metal/Nonmetal Mining 2009

renewcomerLeave a comment

On July 2, 2009, a 52-year old mine owner with 34 years of experience was fatally injured at a surface dimension stone operation. He was working alone and was operating a walk behind masonry saw on a ledge. Apparently he was positioned between the saw and the edge when he tripped and fell. The victim and the saw went over the 9-foot ledge and the saw fell on him.

Best Practices
  • Identify all hazards and use appropriate controls to protect persons.
  • Ensure that operators are in a safe position and have control of their equipment at all times.
  • Keep workplaces free of tripping hazards.
  • Use barricades or railings at edges of drop-offs where persons are in danger of falling.
  • Equip walk behind masonry saws with devices to stop the engine if the operator can not maintain control of the equipment.
  • Design bench top stone cutting patterns so the saw operator is not positioned between the saw and the drop off edge.

Click here for: MSHA Investigation Report(pdf), Overview(powerpoint), Overview(pdf)