On Jan. 19, 2021, a miner (a haul truck driver with 15y 42w mining experience, 07 42w at this task and mine in Orem, UT with 40 employees*) backed a haul truck to the edge of a dump point that was over steepened by a loader removing material at the bottom of the slope. When the edge of the bank failed, the haul truck traveled backwards and overturned, landing on the roof of the cab. The miner was fatally injured.
Best Practices:
- Always dump material in a safe location. If ground conditions aren’t reliable, dump loads a safe distance back and push the material over the edge.
- Never load material from the toe directly below an active dump point. This may lead to an over steepened and unstable slope.
- Never drive haul trucks beyond cracks on the top of the dump site.
- Always construct substantial berms as a visual indicator to prevent overtravel. Clearly mark dump locations with reflectors and/or markers.
- Always wear a seatbelt.
- Install advanced systems that restrain miners during roll-overs.
- Maintain communication between equipment operators and loaders.
- Train miners to use safe dumping procedures and recognize dumping hazards such as material slides and other unsafe conditions.
Additional Information:
This is the second fatality reported in 2021, and the first classified as “Powered Haulage.” *(details added by safeminers.com from MSHA data)
Click here for: Preliminary Report (pdf), Final Report (pdf).