Author: renewcomer

Coal Fatality – 8/1/21

renewcomerLeave a comment

On August 1, 2021, a 38 year old utility person with 12 years 41 weeks experience drowned at a mine in Huntington, UT with 122 employees* during a flash flood while traveling in a personnel carrier to go to the mine portal.  The miner exited the personnel carrier as the floodwater engulfed the vehicle.  As the miner attempted to assist other miners, he was carried away by the floodwater. 

Best Practices: 

•    Monitor flash-flood watches and warnings and other adverse weather conditions, such as severe storm events, that could affect the safety of mine personnel.  Use NOAA Weather Radio or a smartphone app to monitor hazardous weather conditions in your area.
•    Establish policies and procedures to provide adequate warning to all mine personnel of ongoing weather conditions pertaining to flash floods and other adverse weather conditions.
•    Establish policies restricting access to areas likely, or known, to be affected by flash floods or other adverse weather conditions.  Do not travel across flooded roadways.
•    Properly design drainage systems, especially in areas where the terrain enhances water runoff and flooding.  Changes in a watershed, such as timbering or surface mining, can increase water runoff and flooding.
•    Examine drainage systems and features to ensure they are functioning and unobstructed.Additional Information: 

This is the 22nd fatality reported in 2021, and the first classified as “Inundation.” (*details added by safeminers.com from MSHA data.)

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 7/28/21

renewcomerLeave a comment

On July 28, 2021, a 42 year old ledge foreman with 12 years 7 weeks experience* was standing on a rock ledge at a mine with 8 employees in Elberton, GA* to extract dimensional stone when a triangular section of the rock broke off, causing the miner to fall approximately 35 feet.

Best Practices: 

  • Use fall protection when a potential fall hazard exists.  Ensure fall protection has a suitable fall arrest and secure anchorage system.
  • Examine working places to identify loose ground or unstable conditions before work begins, after blasting, and as changing ground conditions warrant.  Ensure examiners have adequate training and experience to recognize potential hazards.
  • Assess risks and control hazards before beginning work activities.  Remain a safe distance from cracks and any sign of unstable ground conditions.
  • Assure a safe means of access is provided and maintained to all working places.  Use personnel lifts and ladders, as required.
  • Train miners and ensure they perform work safely, use tools properly, and utilize personal protective equipment correctly.

Additional Information: 

This is the 21st fatality reported in 2021, and the first classified as “Falling, Rolling, or Sliding Rock or Material of Any Kind.” (*details added by safeminers.com from MSHA data.)

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 7/26/21

renewcomerLeave a comment

On July 26, 2021, a 33 year old contract iron worker with 8 years 13 weeks experience*, who was not wearing fall protection, was performing maintenance on a cement cooler at a mine in Stockertown, PA with 128 employees* when a wooden board broke, causing him to fall 23 feet onto a concrete floor.

Best Practices: 

  • Assure a safe means of access is provided and maintained to all working places.  Use personnel lifts or ladders to access elevated work areas safely.
  • Use fall protection when a fall hazard exists.  Ensure fall protection has a suitable fall arrest and secure anchorage system.
  • Examine work areas, tools, and equipment. Report and correct defects. Do not use unsafe equipment.
  • Assess risks and eliminate or control hazards before beginning maintenance activities. Do not place yourself in a position that will expose you to hazards while performing a task.
  • Train miners and ensure they perform work safely, use tools properly, and utilize personal protective equipment correctly.

Additional Information: 

This is the 20th fatality reported in 2021, and the second classified as “Slip or Fall of Person.”(*details added by safeminers.com from MSHA data.)

Click here for: Preliminary Report (pdf), Final Report (pdf).

Whistleblower Protections

renewcomerLeave a comment

No single thing would reduce injuries and fatalities in the workplace more than if all workers would refuse to perform unsafe actions. I’m convinced that sometimes workers are convinced by pressure from their companies or peers to do so. Other times they voluntarily do so because they mistakenly think it is the only way to accomplish the task. In the end workers doing things they know to be unsafe is often deadly. The best tool provided to each and every worker is the ability to request enforcement inspections from federal and state agencies and flatly refuse to participate without fear of reprisal as is provided under whistleblower protections. In mines we refer to the rights and responsibilities of miners, but this protection is provided in many areas. July 30 was Whistleblower Protection day and a video by Department of Labor Secretary Walsh and links to more information are provided here. – Randy

July Fatality Updates

renewcomerLeave a comment

Final Reports posted:

Fatalities awaiting Fatality Alert to be posted:

  • 7/26/21 MNM – Slip or Fall of Person
  • 7/28/21 MNM – Falling or Sliding Material

Fatalities awaiting Final Report to be posted:

Coal Fatality – 7/21/21

renewcomerLeave a comment

On July 21, 2021, a 31 year old millwright with 13 years experience* received fatal injuries at a mine in Wright, WY with 899 employees* while adding a boom extension to a crane.  The miner was working under the boom to remove the boom pins when he was struck by the boom.

Best Practices: 

  • Never perform work under raised machinery or equipment until such machinery or equipment has been securely braced in position, blocked and  secured against motion.  Be alert for hazards that may be created while the work is being performed. 
  • Conduct repairs from a safe location per manufacturer’s recommendations.  Verify the release of all stored energy before initiating repairs.
  • Use a lifting device compatible with the load being lifted and ensure blocking material is competent, substantial, and adequate to support and stabilize the load.  Always use the manufacturer’s safety devices or features to secure components against motion, and secure assemblies that rotate to prevent movement.
  • Establish and discuss safe work procedures before starting any task.  Train miners in safe work procedures and hazard recognition.  Monitor personnel routinely to ensure safe work procedures are being followed.

Additional Information: 

This is the 19th fatality reported in 2021, and the fourth classified as “Machinery.” (*details added by safeminers.com from MSHA data.)

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 7/13/21

renewcomerLeave a comment

On July 13, 2021, a rock falling from a pillar in a benched area at a room-and-pillar zinc mine with 88 employees in Strawberry Plains, TN, struck a 68 year old scaler operator with 10 years and 40 weeks experience*. The miner was in a personnel lift basket near ground level to load blasting supplies.  The rock fell from a height of approximately 40 feet, striking the basket. 

Best Practices: 

  • Support or remove loose material from a safe position before beginning work.
  • Design, install, and maintain the ground support to control the ground where people work or travel, after blasting, and as ground conditions warrant.
  • Use scaling equipment capable of maintaining safe ground conditions suitable for the mining dimensions.
  • Establish safe work procedures to ensure a safe work location for miners conducting scaling operations.  Train all miners to recognize hazards and understand these procedures.
  • Perform thorough workplace examinations where miners work or travel.
  • Be alert for changing conditions, especially after activities that could cause back/roof disturbance.

Additional Information: 

This is the 18th fatality reported in 2021, and the second classified as “Fall of Face/Rib/Highwall.”  (*details added by safeminers.com from MSHA data.)

Click here for: Preliminary Report (pdf), Final Report (pdf).

Recent Vehicle Rollover Accidents

renewcomerLeave a comment

Some recent accidents occurred when vehicles flipped over backwards, rolled over, and tipped over on their sides. Miners were operating haul trucks, excavators, bulldozers, front end loaders, and service trucks while working or traveling near the edge of dump sites, elevated roadways, embankments, ponds, and excavations.

Contributing factors included the non-use or unbuckling of seat belts; jumping from vehicles; brake failure; distracted driving; loss of vehicle control; traveling or working too close to unconsolidated roadways; inadequate berms; pushing through berms; and failure to perform workplace examinations. [MSHA]

Click here to download MSHA Alert. (pdf)

Powered Haulage Stand Down

renewcomerLeave a comment

So far this year, nine miners have been killed and 185 have been injured in accidents involving powered haulage equipment such as shuttle cars, scoops, locomotives, front end loaders and more. Year to date, this is the highest number of powered haulage fatalities since 2006. The safety of mining’s most precious resource – the miner – is a critical mission at the Mine Safety and Health Administration. That’s why we are hosting a national Stand Down for Safety Day on July 20 focused on powered haulage and vehicle rollovers to help educate miners, save lives and prevent injuries. on July 20, all levels of MSHA enforcement staff will visit mines to meet with miners and operators to emphasize the need for adhering to best safety practices for powered haulage, vehicle rollovers, and miner training to reduce fatalities and injuries.

Click here for more information.