On March 22, 2016, a 42-year old lead man with 6 years of mining experience was fatally injured at a surface limestone mine when he was struck by fly rock from blasting operations. The lead man was parked in his pickup truck at a location to prevent others from accessing the blasting site. He was approximately 1,200 feet from the blast area.
Best Practices
- Review and follow site specific blast plan prior to loading any explosives.
- Utilize technology, such as face profilers and borehole probes, to obtain specific geometric details of the material to be blasted.
- Adjust stemming depth and/or decking to maintain adequate burden on all sections of the blast hole.
- Develop a drill pattern by considering geology, face geometry, and surface topography.
- Clear and remove all persons from the blast area unless suitable blasting shelters are provided to protect persons from flyrock. Allow at least 15 seconds after a blast for any flyrock to drop.
- Examine blast site geology, communicate with the driller and review the drill log for angles, voids, competency of rock, loss of air, etc., prior to the loading any explosives. Make appropriate adjustments to ensure that the holes are not overloaded.
- Ensure blasting and fly rock areas are properly calculated to ensure the blast site is clear of all persons.
- Determine the actual burden for all face holes along their length and adjust the explosive power factor along the borehole accordingly.
Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf), Overview (pdf).
On March 8, 2016, a 54-year old miner with 5 years of mining experience was killed at a surface sand and gravel operation. The miner backed his haul truck over a dump site and the driver was found at the bottom of the embankment, 60 feet below. The victim was found unresponsive and partially submerged in water. CPR was attempted, but the victim was not able to be resuscitated.
Today MSHA held a briefing to present their proposed rule change for Workplace Examinations in Metal-Nonmetal. My preliminary assessment is that it makes the following changes:
On Friday, March 25, 2016, a 48-year-old continuous mining machine operator, with 30 years of mining experience, was fatally injured when an overhanging section of a rock rib fell and pinned him against the haulage equipment. The fallen rib was approximately 44 feet long, 4 feet wide, and 2 feet thick. The victim was remotely operating a continuous mining machine that was being used to excavate material during the construction of a coal transfer shaft. The area where the accident occurred had a depth of cover of approximately 1,950 feet and a height of approximately 17 feet.
On Tuesday, January 19, 2016, a 36-year-old continuous mining machine operator was fatally injured when he was pinned between the conveyor boom of the remote controlled continuous mining machine and the coal rib while positioning the trailing cable. The victim had trammed the continuous mining machine back out of the No. 6 Face into the last open crosscut between No. 6 and No. 5 Entries. The victim had 5 years and 6 months of mining experience, with 1 year and 17 weeks experience as a continuous mining machine operator.
On January 16, 2016, a 31 year old continuous mining machine operator with 12 years of mining experience was fatally injured when a section of coal/rock rib measuring 4.5 feet long, 3 feet high, and 3 feet thick fell and pinned him to the mine floor. The victim was remotely operating the continuous miner in the number 2 entry of the advancing section when the accident occurred.
On Monday, January 4, 2016, a 53 year-old belt foreman/fireboss with 34 years of mining experience was fatally injured when he came in contact with a moving underground belt conveyor. The victim was preparing to change out a hold up roller when he was caught by the moving belt and pulled into the roller.
On February 26, 2016, a truck driver delivering multiple sections of polyurethane pipe was struck by a section of pipe during the unloading process. A forklift removed two sections of pipe from the passenger side of the truck, and then left the area with the two sections. While the forklift was away, a single, unsecured section of pipe rolled off on the driver’s side of the truck and struck the victim. Each section of pipe was approximately 50’ long and weighed approximately 1,750 pounds. Miners began first aid but the driver was unresponsive. He was transported to the local hospital and later died.
On December 28, 2015, a 42-year old miner with 3 years of experience was killed at a surface gold mine. The operator of a loaded haul truck was attempting to have his truck climb a snow covered access road when his truck slid backwards striking the cab of the victim’s loaded haul truck, which was also recovering from sliding backwards down the same access road. Several minutes later, a third loaded haul truck also slid down backwards while attempting to climb the access road, colliding with the other wrecked haul trucks.