Coal

Fatality #17 for Coal Mining 2012

renewcomerLeave a comment

On Saturday, November 17, 2012, a 30-year-old continuous mining machine operator was killed when he was pinned between the head of the remote controlled continuous mining machine and the coal rib. The victim had 3 years of mining experience, with 20 weeks of experience as a continuous mining machine operator. The victim had mined the left side of an entry and was repositioning the continuous mining machine to mine the right side when the accident occurred.

Best Practices

  • Install and maintain proximity detection systems. See the proximity detection single source page on the MSHA website.
  • Develop programs, policies, and procedures for starting and tramming remote controlled continuous mining machines.
  • Frequently review, retrain, and discuss avoiding the “RED ZONE” areas when operating or working near a remote controlled continuous mining machine.
  • Train all production crews and management in the programs, policies, and procedures and ensure that they are followed.
  • Ensure that mining machine operators are in a safe location while tramming the continuous mining machine from place to place or repositioning in the entry during cutting and loading.
  • Ensure everyone is outside the machine turning radius before starting or moving the equipment.
  • When moving continuous mining machines where the left and right traction drives are operated independently, low tram speed should be used.
  • Assign another miner to assist the continuous mining machine operator when it is being moved or repositioned. Train all persons in the programs, policies, and procedures for operating or working near remote controlled continuous mining machines. Additional information on preventing these types of accidents can be found at:MSHA’s Safety Targets Program Hit By Underground Equipment.

Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf).

Fatality #16 for Coal Mining 2012

renewcomerLeave a comment

On Wednesday, September 26, 2012, a 32-year old section foreman with 12 years of experience was killed by a roof fall at Kopper Glo Mining’s Double Mountain Mine. He was operating the continuous mining machine to excavate a roof cavity in preparation for the installation of a belt conveyor drive. The foreman was positioned approximately 8 feet inby the last row of permanent roof support when a section of the unsupported roof, approximately 6½ feet long, by 6 feet wide, by up to 8 inches thick fell, striking the victim and pinning him to the mine floor.

Best Practices
  • Always post the end of permanent roof support with a readily visible warning or physical barrier to impede travel beyond permanent roof support. This serves to alert all miners as they approach a danger zone.
  • Never travel beyond permanent roof support.
  • Never expose any portion of your body inby the last row of undisturbed permanent roof supports.
  • Make frequent, thorough roof examinations and be aware of changing roof conditions at all times.
  • Give extra attention to the roof after activities that cause roof disturbance.
  • Take extra precautions when cutting out roof support or mining above the normal roof line, such as mining a shorter depth of cut, then install two rows of roof bolts before continuing to mine.

Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf).

Fatality #15 for Coal Mining 2012

renewcomerLeave a comment

On Thursday, September 13, 2012, a 61-year-old general inside laborer with 38 years of mining experience was killed when he was struck by a section of mine roof. The victim was removing a roof bolt from an older area of the mine which was no longer in contact with the mine roof. A section of mine roof fell, striking the victim.

Best Practices
  • Before performing work in any area of the mine, observe the roof and ribs for hazardous conditions and correct hazards immediately.
  • Install additional roof supports prior to removing old supports.
  • Perform sound and vibration testing before installing or removing permanent roof supports.
  • Only remove roof supports under the direction of a manager or foreman.
  • Use roof screen (wire mesh) to control loose roof in long-term travel roads.
  • Take extra precautions when working or traveling in older areas of the mine, paying particular attention to deteriorating roof conditions.
  • Make frequent roof examinations and be alert to changing roof conditions at all times. Give extra attention to the roof after activities occur that could cause roof disturbance.

Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf).

Fatality #14 for Coal Mining 2012

renewcomerLeave a comment

On September 11, 2012, at approximately 10:15 a.m., a fatal accident occurred while moving longwall equipment at the Drummond Company, Inc., Shoal Creek Mine. A 28 year old miner was killed when he was crushed between the coal rib and a large power center, weighing approximately 30 tons.

Best Practices
  • Prior to beginning any work activity, train the miners to perform the task-at-hand safely.
  • STAY OUT of areas where clearance is tight (pinch points) and visibility is limited when haulage equipment is being operated to move large equipment and/or components.
  • Ensure that equipment operators establish good communications between themselves and other miners that may be working around or near their equipment.
  • While moving equipment, ensure that all persons are located safely out of the route of travel, especially with limited visibility.
  • Ensure that all large equipment and/or components are secured adequately to prevent unintended motion when being moved.
  • Inspect the mine floor properly in areas where large equipment and/or components will be transported to identify any irregularities that may cause unexpected movement of the equipment and/or components being moved, or with the machinery being operated to move the equipment.

Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf).

Fatality #13 for Coal Mining 2012

renewcomerLeave a comment

On Tuesday, July 31, 2012, at approximately 12:45 p.m., a 43-year-old scoop operator received fatal crushing injuries when he was caught between a battery powered scoop and the coal rib while attempting to change the scoop’s batteries. The scoop was parked at a battery charging station located four crosscuts from the working section when it was impacted by another scoop which was traveling outby adjacent to the charging station.

Best Practices
  • Equipment operators should sound audible warnings when traveling around turns or blind spots, through ventilation curtains, and at any time the operator’s visibility is obstructed.
  • Always look in the direction of equipment movement and exercise caution in areas where clearance is tight and visibility is limited. Install warning signs to remind equipment operators of the hazards present in these areas.
  • Assure that the area where equipment is parked is conspicuously marked with reflective material and/or signs if there is a potential for other equipment to strike it.
  • Install Proximity Detection Systems on continuous mining machines and haulage equipment to prevent these types of injuries and fatalities. Proximity detection Single Source Page
  • Ensure that equipment operators establish good communications between themselves and other miners that may be working around or near their equipment.

Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf).

Fatality #12 for Coal Mining 2012

renewcomerLeave a comment

On Friday, July 27, 2012, at approximately 4:15 a.m., a 35-year-old move crew member with 5 years of mining experience received fatal crushing injuries when he was pinned between the conveyor boom of a remote controlled continuous mining machine and the outby rib of the No. 4 Right Crosscut. The continuous mining machine was moving to an adjacent entry in preparation for the oncoming day shift when the accident occurred.

Best Practices

  • Ensure that all persons, including the continuous mining machine operator, are positioned outside the machine’s turning radius before starting or moving the machine.
  • Maintain clear visibility and communications with all personnel in the vicinity of the equipment, and minimize the number of miners working around or near continuous mining machines.
  • Frequently review, retrain, and discuss the importance of staying out of any “RED ZONE” area while operating or working near a continuous mining machine.  REDZONE2 (pdf) and Continuous Miner Package
  • Position the conveyor boom away from the operator or other miners working in the area when tramming or moving the machine.
  • Install Proximity Detection Systems on continuous mining machines and haulage equipment to prevent these types of injuries and fatalities.
    Proximity Detection Single Source Page

Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf).

Fatality #11 for Coal Mining 2012

renewcomerLeave a comment

On Saturday, July 14, 2012, a 25-year old water truck driver with 31 weeks of experience was killed at a surface mine. The victim was driving a water truck down a grade in an active work area of the mine when he lost control of the truck. The truck struck a berm on the right side of the roadway, traveled across the roadway, struck an embankment on the left side of the roadway and overturned, ending up facing opposite the original direction of travel. The victim was found ejected from the truck.

  • Train all employees thoroughly on proper work procedures, hazard recognition and avoidance, and proper use of roadway berms.
  • Conduct pre-operational checks to identify defects that may affect the safe operation of equipment before being placed into service.
  • Never operate a truck or other mobile equipment without using a seat belt.
  • Know the truck’s capabilities, operating ranges, load-limits, and maintain the brakes and other safety features properly.
  • Construct roadway berms to appropriate strengths and geometries. Ensure all grades and haulage roads are appropriate for the haulage equipment being used.
  • Maintain control of equipment at all times, making allowances for the prevailing conditions (low visibility, inclement weather, etc).
  • Observe all speed limits, traffic rules, and ensure that grades on haulage roads are appropriate for haulage equipment being used.
  • Always select the proper gear and downshift well in advance of descending the grade.
  • Maintain equipment braking and steering systems in good repair and adjustment. Never rely on engine brakes and transmission retarders as substitutes for keeping brakes properly maintained.
  • Monitor work habits routinely and examine work areas to ensure that safe work procedures are followed.
  • Do not attempt to exit or jump from a moving vehicle .

Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf).

Fatality #10 for Coal Mining 2012

renewcomerLeave a comment

On Monday, June 25, 2012, at approximately 11:45 AM, a 33-year-old outby foreman with 7 years of experience was killed while installing additional rib/roof support in the No. 5 belt/track entry. The victim was wedging a timber against the mine roof to support the rib, when a section of the left hand rib rolled on top of him. The rock was approximately 14 feet long, 4 feet high, and 17 inches thick.

  • Conduct thorough pre-shift and on-shift examinations of the roof, face, and ribs. A thorough exam must be conducted before any work or travel is started in an area and thereafter as conditions warrant.
  • Support any loose roof or rib material adequately or scale loose material from a safe location before working or traveling in an area.
  • Danger-off areas that have hazardous roof or rib conditions until they are made safe.
  • Take additional safety precautions when mining heights increase because rib fall injury rates increase substantially as the mining height increases.
  • Use rib bolting to control unstable ribs. Rib bolts provide the best protection against rib falls and are most effective when installed on cycle and in a consistent pattern.
  • Be alert to changing geologic conditions which may affect roof/rib conditions.
  • Ensure that the Approved Roof Control Plan is followed and is suitable for the geologic conditions encountered.
  • Revise the Approved Roof Control Plan as needed when adverse conditions are encountered.

Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf).

Fatality #9 for Coal Mining 2012

renewcomerLeave a comment

On May 24, 2012, a 43-year-old shaft worker with 39 weeks of mining experience died from injuries he received on May 15, 2012. The victim was helping pour concrete in a 30-foot diameter shaft that was under construction. The victim and his coworkers were using a hose to direct concrete into forms that lined the shaft wall. The hose was overloaded as concrete came out of the hopper too fast, which caused the hose to surge. This sudden movement of the hose knocked the victim and his coworkers off their feet, resulting in a fracture to the left leg of the victim. The victim was treated at a local hospital and released. On May 24, 2012, he passed away at his residence as a result of complications of this injury.

Best Practices

  • Provide a means to control water, air, concrete, etc., lines when they are pressurized to prevent surges and other unintended movement.
  • Train miners on procedures and safety precautions to take if the discharge line becomes plugged or overloaded.
  • Provide positive communication between the worker controlling the flow and the workers manually handling the concrete hose.
  • Safety chains or guarding should be used at concrete hose discharge location.
  • Anchor the discharge line to prevent it from movement in the event of a surge.

Click here for: MSHA Preliminary Report (pdf),  MSHA Investigation Report (pdf).

Fatality #8 for Coal Mining 2012

renewcomerLeave a comment

On Thursday, May 17, 2012, at approximately 12:00 p.m., a 57-year-old mechanic was killed at a coal preparation plant. The victim was standing on a 14-foot fiberglass extension ladder when it became unstable and slid across an I-beam. He fell down an adjacent hoist well opening 39 feet to the concrete floor below. He was attempting to cut and remove a 12-inch hoist beam located above the third floor in the plant.

Best Practices

  • Use fall protection when working in an elevated position and securely tie-off where the danger of falling exists.
  • Ensure all workers are adequately trained in the use of fall protection and restraint devices.
  • Examine fall protection equipment and personal protective equipment before each use. Ensure that defective equipment is replaced.
  • Use a ladder only on a stable and level surface, unless it has been secured (top or bottom) to prevent displacement.
  • Properly position ladders to ensure that footing is secure, that the ladder is resting in a manner that prevents movement, and that the ladder is protected from being struck by moving objects.
  • Keep your body centered between the rails of the ladder at all times. Do not lean too far to the side while working.
Click here for: MSHA Preliminary Report (pdf),  MSHA Investigation Report (pdf).