Mining Fatalities

Coal Fatality – 3/2/22

renewcomerLeave a comment

On March 2, 2022, a miner was fatally injured when an overhang along the mine rib fell, striking the miner and pushing him against the canopy of a twin boom roof bolting machine.  The miner freed himself from the fall, but later died. 

Best Practices: 

  • Remove overhangs with the continuous mining machine.
  • Install support of proper length with surface area coverage, on cycle, and in a consistent pattern for the best protection against falls.
  • Examine the roof, face, and ribs immediately before starting work in an area where people work and travel, including sound and vibration testing where applicable.
  • Scale loose roof and ribs from a safe location.  Prevent access to hazardous areas until you take corrective measures.
  • Take additional safety precautions when encountering new and changing roof and rib conditions.
  • Train miners on how to identify hazardous roof and rib conditions.

Additional Information: 

This is the ninth fatality reported in 2022, and the first classified as “Fall of Face, Rib, Side, or Highwall.”

Click here for: Preliminary Report (pdf), Final Report (pdf).

Coal Fatality – 2/28/22

renewcomerLeave a comment

On February 28, 2022, a contract miner died when he was crushed between the rib and a single boom face drill.  The victim was alongside the drill using the onboard tram lever controls when the accident occurred because the remote control was inoperable.

Best Practices: 

  • Mobile equipment shall be maintained in safe operating condition.  Immediately remove mobile equipment in unsafe condition from service.
  • Always operate mobile equipment from a safe location.  Use the remote control or operate from within the operator’s compartment if available.
  • Determine the proper working position to avoid pinch points and Red Zone areas.
  • Train miners on the safety aspects and safe operating procedures of mobile equipment before use.  Review and discuss pinch points and Red Zone locations.

Additional Information: 

This is the eighth fatality reported in 2022, and the third classified as “Machinery.”

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 12/13/21 Surface

renewcomerLeave a comment

On December 13, 2021, a customer truck driver (victim) stopped at a designated tarping area and was assisting another driver with a rear trailer indicator light.  The victim’s truck moved forward and pinned him against the back of the other driver’s truck.

Best Practices: 

  • Do not leave mobile equipment unattended unless the transmission is in the park position, the parking brake is set, and the trailer brakes are engaged.
  • Block, or secure from movement, mobile equipment parked on a grade.
  • Never position yourself in hazardous areas around mobile equipment parked on a grade that is not blocked or secured from movement.
  • Train customer truck drivers on site-specific hazards.

Additional Information: 

This is the 37th fatality reported in 2021, and the 17th classified as “Powered Haulage.”

Click here for: Preliminary Report (pdf), Final Report (pdf).

Coal Fatality – 1/14/22

renewcomerLeave a comment

On January 14, 2022, a 44-year-old contract laborer with 13 years of total experience received fatal injuries when he fell 27 feet to a concrete surface.  At the time of the accident, the contractor was on a belt conveyor in a preparation plant and was working to replace a belt conveyor roller. 

Best Practices: 

  • Establish and follow safety policies and procedures, when working at heights.
  • Train miners to use fall protection when a fall hazard exists.
  • Ensure fall protection is available and properly maintained.
  • Provide identifiable and secure anchor points to attach lanyards and lifelines.
  • Provide mobile or stationary platforms—or scaffolding—where there is a risk of falling.

Additional Information: 

This is the fourth fatality reported in 2022, and the first classified as “Slip or Fall of Person”

Click here for: Preliminary Report (pdf), Final Report (pdf).

Coal Fatality – 1/7/22

renewcomerLeave a comment

On January 7, 2022, a 35 year-old continuous mining machine (CMM) operator was fatally injured when he was pinned between the remote controlled CMM and the coal rib. 

Best Practices: 

  • Operate equipment from a safe location. Stay out of “Red Zone” areas including pinch points, the CMM turning radius, and areas close to the ribs.
  • Maintain proximity detection systems (PDS) in the approved operating condition.
  • Perform the manufacturer’s recommended static and dynamic tests to assure the PDS is functioning properly. Verify that the shutdown zones are at sufficient distances to stop the CMM before contacting a miner.
  • Wear miner wearable components in accordance with PDS manufacturer’s recommendations so warning lights and sounds can be seen and heard.
  • Develop and implement procedures for tramming, repositioning, cable handling and moving remote controlled CMMs safely.
  • Train miners on the function of PDS.

Additional Information: 

This is the second fatality reported in 2022, and the first classified as “Machinery.”

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 12/3/21

renewcomerLeave a comment

On December 3, 2021, a miner was fatally injured when he became entangled in the return idler on the belt conveyor under a portable crusher plant. 

Best Practices: 

  • Before performing maintenance and repair work near belt conveyors:
    • Remove power from the belt drive.
    • Securely block equipment against hazardous motion in accordance with manufacturer’s instructions.
  • Guard moving machine parts to protect miners from contacting moving parts.
  • Provide and maintain a safe means of access to all working places.
  • Conduct thorough examinations of equipment. Report defects and do not work in unsafe conditions.
  • Train miners to assess risks and control hazards before beginning work on belt conveyors.

Additional Information: 

This is the 33rd fatality reported in 2021, and the 16th classified as “Powered Haulage.”

Click here for: Preliminary Report (pdf), Final Report (pdf).

Coal Fatality – 1/11/22

renewcomerLeave a comment

On January 11, 2022, a 32 year-old miner died while driving on a mine road when a tree fell from a highwall onto the cab of his pickup truck.

Best Practices: 

  • Examine highwalls frequently and from as many perspectives as possible (bottom, sides, and top/crest).  Look for signs of instability such as cracks, sloughing, loose ground, and for fall of material hazards such as large trees and rocks.
  • Train all miners to recognize hazardous highwall conditions.
  • Conduct additional examinations as conditions warrant, especially during periods of changing weather conditions.
  • Clear loose or potentially hazardous material from near the edge of highwalls and slopes, especially when persons will work or travel below.
  • Develop and follow a ground control plan that addresses all potential hazards.

Additional Information: 

This is the third fatality reported in 2022 and the first classified as “Falling, Rolling, or Sliding Rock or Material of Any Kind.” 

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 1/7/22

renewcomerLeave a comment

On January 7, 2022, a 49 year-old front-end loader operator with 15 years of mining experience died when a large rock fell from the mine roof, crushing the cab of the front-end loader.  When the accident occurred, the victim was loading material from a recently blasted shot. 

Best Practices: 

  • Scale the back and ribs before performing work in an area.
  • Conduct examinations of the back, face, and ribs where miners work and travel.
  • Install suitable ground support where conditions warrant.
  • Use geologic hazard mapping to identify adverse conditions and be aware of changing ground conditions.
  • Train miners to identify workplace hazards and take action to correct them.

Additional Information: 

This is the first fatality reported in 2022, and the first classified as “Fall of Roof or Back.”

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality 12/13/21 Underground

renewcomerLeave a comment

On December 13, 2021, a miner was fatally injured when he became entangled in the drill steel of the roof bolting machine he was operating.

Best Practices: 

  • Before performing maintenance and repair work on roof bolting machines or other equipment:
    • Turn off the engine.
    • Securely block equipment against hazardous motion by following manufacturer’s recommendations.
  • Never touch or hold the drill steel while it is rotating.
  • Do not wear loose-fitting or bulky clothing when working around any machinery with rotating parts.
  • Train miners to perform their assigned tasks safely.

Additional Information: 

This is the 36th fatality reported in 2021, and the seventh classified as “Machinery.”

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 12/6/21

renewcomerLeave a comment

On December 6, 2021, a miner was fatally injured while he was working in a pan feeder under a chute.  While attempting to remove angle iron that blocked the chute’s gate from closing, he was engulfed by material that fell from a surge pile above the chute.  The victim died from his injuries on December 10, 2021.

Best Practices: 

  • Do not allow miners to travel on or below material that is on or above the sides of a bin, hopper, or chute.
  • Provide mechanical devices or other effective means to protect miners from entrapment by caving material.
  • Provide and maintain a safe means of access for all working places.
  • De-energize, lock out, tag out, and block machinery or equipment against hazardous motion before performing repairs or maintenance.
  • Examine work areas and equipment.  Correct defects, or report them to the operator.
  • Train miners to perform their assigned tasks safely.

Additional Information: 

This is the 35th fatality reported in 2021, and the second classified as “Confined Space.”

Click here for: Preliminary Report (pdf), Final Report (pdf).