Surface

MNM Fatality – 9/21/21

renewcomerLeave a comment

On September 21, 2021, a 68-year-old contract truck driver with 20 years of experience was fatally injured while operating a haul truck.  The victim was found lying in front of his truck near the edge of a haul road.  The truck was upright and in the opposite direction of the expected route of travel.

Best Practices: 

  • Establish a site traffic plan to include traffic routes, speed limits, and access points.  Train miners to follow all traffic controls.
  • Conduct pre-operational examinations to identify and repair defects that may affect the safe operation of equipment before placing equipment into service.
  • Operate mobile equipment at speeds consistent with conditions of roadways, grades, curves, and traffic.
  • Maintain control while operating mobile equipment.  Never exceed a vehicle’s design capabilities, operating ranges, load limits, and safety features.
  • Always wear a seat belt when operating mobile equipment.
  • Never exit a moving vehicle.  Remain in the seat with your seat belt secured.

Additional Information: 

This is the 27th fatality reported in 2021, and the twelfth classified as “Powered Haulage.”

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 9/15/21

renewcomerLeave a comment

On September 15, 2021, a 33-year-old contract welder with nearly 11 years experience in mining and 7 weeks experience at the task he was performing* was fatally injured at a mine with 3700 employees and 115 contractors* when he crawled 40 feet into a 30-inch-diameter stainless-steel pipe.  The victim was welding a joint from the outside of the pipe, and then entered the pipe to troubleshoot issues related to argon gas leakage.  Coworkers found him unresponsive.

Best Practices: 

  • Remove dangerous working materials and gasses by means of a high volume of fresh airflow before entering confined spaces.
  • Assess risks and hazards before beginning work activities to determine what personal protective equipment (PPE) and atmospheric testing is needed prior to entry and during work execution.
  • Test atmospheres from a safe location with a calibrated gas monitor capable of detecting harmful and noxious gasses before entering and continuously while working in confined spaces.
  • Designate a miner to maintain contact with the miner entering a confined space in the form of visual or voice contact, or signal lines.
  • Ensure miners use the appropriate PPE, including dry, flame-retardant clothing and respiratory protection equipment, such as powered air-purifying respirators.
  • Train miners to identify confined spaces and understand their associated hazards.

Additional Information: 

This is the 26th fatality reported in 2021, and the first classified as “Other.” (*details added by safeminers.com from MSHA data.)

Click here for: Preliminary Report (pdf), Final Report (pdf).

Coal Fatality – 8/11/21

renewcomerLeave a comment

On August 11, 2021, a 53-year-old contract truck driver with ten years’ experience was fatally injured while conducting a pre-operational examination of a truck at a mine in Mill Creek WV with 28 employees and 20 contractors*.  The rear wheels of the vehicle struck the truck driver when the truck rolled forward.

Best Practices: 

  • Block mobile equipment against motion.  Adequately chock wheels or turn wheels into a bank.
  • Use specially designed truck-wheel chocks of the appropriate size and material to hold the vehicle securely.  Do not use lumber, cinder blocks, rocks, or other makeshift items to chock.
  • Never position yourself in hazardous areas around equipment parked on a grade that is not blocked or secured from movement.
  • Maintain the equipment’s braking systems.  Perform repairs and adjustments when necessary and follow the manufacturer’s recommendations.  Do not exceed the manufacturer’s load limits.

Additional Information: 

This is the 24th fatality reported in 2021, and the tenth classified as “Powered Haulage.” (*details added by safeminers.com from MSHA data.)

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 8/3/21

renewcomerLeave a comment

On August 3, 2021, a 62 year old Utility Person with 14 years 48 weeks experience* was run over by a customer tractor-trailer while walking to his normal work area at a mine in Bridgeport, TX with 83 employees*.

Best Practices: 

  • Assure adequate illumination sufficient to provide safe working conditions.
  • Communicate with mobile equipment operators and make eye contact to ensure they acknowledge your presence. Be aware of the location and traffic patterns of mobile equipment in your work area.
  • Wear high visibility clothing when working around mobile equipment.
  • Wear strobe lights near mobile equipment.
  • Assure traffic controls provide for safe movement of mobile equipment and are followed. Operate mobile equipment at reduced speeds in work areas.
  • Stay clear of normal paths of travel for mobile equipment and train all persons to recognize work place hazards.

Additional Information: 

This is the 23rd fatality reported in 2021, and the ninth classified as “Powered Haulage.” (*details added by safeminers.com from MSHA data.)

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 7/28/21

renewcomerLeave a comment

On July 28, 2021, a 42 year old ledge foreman with 12 years 7 weeks experience* was standing on a rock ledge at a mine with 8 employees in Elberton, GA* to extract dimensional stone when a triangular section of the rock broke off, causing the miner to fall approximately 35 feet.

Best Practices: 

  • Use fall protection when a potential fall hazard exists.  Ensure fall protection has a suitable fall arrest and secure anchorage system.
  • Examine working places to identify loose ground or unstable conditions before work begins, after blasting, and as changing ground conditions warrant.  Ensure examiners have adequate training and experience to recognize potential hazards.
  • Assess risks and control hazards before beginning work activities.  Remain a safe distance from cracks and any sign of unstable ground conditions.
  • Assure a safe means of access is provided and maintained to all working places.  Use personnel lifts and ladders, as required.
  • Train miners and ensure they perform work safely, use tools properly, and utilize personal protective equipment correctly.

Additional Information: 

This is the 21st fatality reported in 2021, and the first classified as “Falling, Rolling, or Sliding Rock or Material of Any Kind.” (*details added by safeminers.com from MSHA data.)

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 7/26/21

renewcomerLeave a comment

On July 26, 2021, a 33 year old contract iron worker with 8 years 13 weeks experience*, who was not wearing fall protection, was performing maintenance on a cement cooler at a mine in Stockertown, PA with 128 employees* when a wooden board broke, causing him to fall 23 feet onto a concrete floor.

Best Practices: 

  • Assure a safe means of access is provided and maintained to all working places.  Use personnel lifts or ladders to access elevated work areas safely.
  • Use fall protection when a fall hazard exists.  Ensure fall protection has a suitable fall arrest and secure anchorage system.
  • Examine work areas, tools, and equipment. Report and correct defects. Do not use unsafe equipment.
  • Assess risks and eliminate or control hazards before beginning maintenance activities. Do not place yourself in a position that will expose you to hazards while performing a task.
  • Train miners and ensure they perform work safely, use tools properly, and utilize personal protective equipment correctly.

Additional Information: 

This is the 20th fatality reported in 2021, and the second classified as “Slip or Fall of Person.”(*details added by safeminers.com from MSHA data.)

Click here for: Preliminary Report (pdf), Final Report (pdf).

Coal Fatality – 7/21/21

renewcomerLeave a comment

On July 21, 2021, a 31 year old millwright with 13 years experience* received fatal injuries at a mine in Wright, WY with 899 employees* while adding a boom extension to a crane.  The miner was working under the boom to remove the boom pins when he was struck by the boom.

Best Practices: 

  • Never perform work under raised machinery or equipment until such machinery or equipment has been securely braced in position, blocked and  secured against motion.  Be alert for hazards that may be created while the work is being performed. 
  • Conduct repairs from a safe location per manufacturer’s recommendations.  Verify the release of all stored energy before initiating repairs.
  • Use a lifting device compatible with the load being lifted and ensure blocking material is competent, substantial, and adequate to support and stabilize the load.  Always use the manufacturer’s safety devices or features to secure components against motion, and secure assemblies that rotate to prevent movement.
  • Establish and discuss safe work procedures before starting any task.  Train miners in safe work procedures and hazard recognition.  Monitor personnel routinely to ensure safe work procedures are being followed.

Additional Information: 

This is the 19th fatality reported in 2021, and the fourth classified as “Machinery.” (*details added by safeminers.com from MSHA data.)

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 6/7/21

renewcomerLeave a comment

On June 7, 2021, at a mine with 25 employees*, a 56 year old hopper operator with 6 years and 36 weeks experience* entered the top of a primary feed hopper to break up and remove a large rock. Raw material that remained on the sides of the hopper sloughed off and engulfed the miner.

Best Practices: 

  • Equip hoppers with mechanical devices, grates/grizzlies or other effective means of handling material so miners are not required to enter or work where they are exposed to entrapment by caving or sliding material.
  • Establish and assure policies and procedures are followed to safely remove blockages in bins and hoppers. Follow manufacturer recommendations.
  • Provide a safe means of access that allows miners to safely conduct tasks such as removing large rocks and other material.
  • Wear an appropriate safety harness, lanyard and lifeline which are securely anchored and constantly monitored and adjusted by another person, as needed, prior to entering bins or hoppers.
  • Train miners in safe work procedures and hazard recognition especially when removing blockages in bins or hoppers.

Additional Information: 

This is the 15th fatality reported in 2021, and the second classified as “Handling Material.” (*details added by safeminers.com from MSHA data.)

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 4/22/21

renewcomerLeave a comment

On April 22, 2021, a 53 year old dredge operator with 6 years 40 weeks experience* was fatally injured at a sand & gravel mine with 3 employees* when leaving the mine site in his personal pickup truck.  The manual swing barrier gate was partially closed.  A gate pole entered the truck’s windshield as the pickup truck approached, striking the victim and causing fatal injuries.

Best Practices: 

  • Ensure that manual swing barrier gates can be secured when opened or closed to prevent unintentional movement.
  • Paint or tape swing barrier gates with reflective and distinguished markings to differentiate them from their surroundings.  Install additional lighting near barrier gates.
  • Conduct thorough travelway examinations to identify and mitigate hazards.
  • Establish safetraffic patterns with proper signage. 
  • Be alert to road conditions and always keep a clear line of sight.
  • Maintain proper speed for road conditions.

Additional Information: 

This is the ninth fatality reported in 2021, and the fifth classified as “Powered Haulage” (*details added by safeminers.com from MSHA data.)

Click here for: Preliminary Report (pdf), Final Report (pdf).

MNM Fatality – 4/19/21

renewcomerLeave a comment

On April 19, 2021, a 28 year old haul truck driver with 37 weeks and 5 days experience* stopped his haul truck in front of his personal vehicle to get his lunch at a crushed stone mine with 27 employees.*  While standing and eating his lunch, the haul truck rolled forward, pinning the miner between the haul truck and his personal truck.

Best Practices: 

  • Do not leave mobile equipment unattended unless the controls are placed in the park position and the brake is set.  NEVER use a steering column-mounted “dump brake” for parking.
  • When parking mobile equipment on a grade, chock the wheels or turn them into a bank.Maintain equipment braking systems in good repair and adjustment.
  • Position yourself in a safe location away from potential “danger-zone” areas.
  • Train miners to safely perform their tasks.

Additional Information: 

This is the eighth fatality reported in 2021, and the fourth classified as “Powered Haulage.” (*details added by safeminers.com from MSHA data.)

Click here for: Preliminary Report (pdf), Final Report (pdf).