On December 30, 2017, an employee in a pickup truck approached the quarry loadout area to get the Front End Loader (FEL) operator for lunch. The FEL backed into the pickup, pushing it sideways and crushing the driver’s side of the pickup cab, trapping the victim inside the truck. The pickup truck caught fire and efforts by the FEL operator and a nearby contractor to put the fire out using fire extinguishers were not successful.
Best Practices
- When approaching large mobile equipment, do not proceed until you communicate and verify with the equipment operator your planned movement and location. Provide radio communication systems between vehicles and large mobile equipment.
- Ensure all persons are trained to recognize workplace hazards – specifically, the limited visibility and blind areas inherent to operation of large equipment and the hazard of mobile equipment traveling near them.
- Ensure, by signal or other means, that all persons are clear before moving equipment.
- Minimize situations where smaller vehicles need to approach large front end loaders.
- Do not drive or park smaller vehicles in mobile equipment’s potential path of movement.
- Equip smaller vehicles with flags or strobe lights positioned high enough to be seen from the cabs of haulage trucks.
- Install and maintain proximity detection or collision avoidance/warning systems and cameras.
Click here for: MSHA Preliminary Report (pdf), Final Report (pdf).
On September 20, 2017, a contractor was fatally injured while rappelling within a conditioning tower. The victim was examining the inside of a 300’ vertical conditioning tower when an object fell from above and struck him in the head. The victim was conscious and transported to a local hospital where he died of his injuries the next day.
On August 9, 2016, a 33 year old Leadman Contractor, with 4 years of experience, was killed at a cement plant loadout. The victim was attempting to replace the lift cable pulleys on the barge loadout chute, when the anchor point for the temporary rigging separated from the loadout chute and it unexpectedly fell. The falling loadout chute caused the lift cables to tighten and the lift cables pinned the victim to the loadout chute causing fatal injuries.
On May 10, 2016, a 46-year old maintenance man with 6 years of experience was fatally injured at a cement plant. The victim went to the top of the slurry tank to start the rake system. He fell 50 feet through a 3-foot by 4-foot opening in the walkway into the empty slurry tank below.
On December 15, 2015, a 75-year old tow truck laborer was killed at a cement plant. As the tow truck operator was lowering the truck’s boom it struck the victim. The victim suffered a severe head wound but was conscious when transported to a local hospital but later died of his injuries.
