Slip or Fall of Person

Fatality #6 for Metal/Nonmetal Mining 2011

renewcomerLeave a comment

On June 4, 2011, a 39 year-old mill operator with 1 year and 14 weeks of experience was killed at a surface gold operation. The victim was sweeping in a crusher building when he fell through an opening approximately 60 feet to the floor below. The cover for the opening was not secured in place.

Best Practices

  • Establish and discuss safe work procedures. Identify and control all hazards. Train all persons to recognize and understand safe job procedures before beginning work.
  • Always use fall protection when working where a fall hazard exists.
  • Protect openings near travelways through which persons may fall by installing railings, barriers, or covers.
  • Keep temporary access opening covers secured in place at all times when the opening is not being used.
  • Ensure that areas are barricaded or have warning signs posted at all approaches if hazards exist that are not immediately obvious.

Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report(pdf), Overview(powerpoint), Overview (pdf).

 

Fatality #10 for Metal/Nonmetal Mining 2010

renewcomerLeave a comment

On June 12, 2010, a 46-year-old contractor welder was fatally injured at a crushed stone operation. He was preparing to weld on an overhead ventilation duct. The victim was using a ladder to access the duct when he fell over a handrail approximately 45 feet to the ground.

Best Practices

  • Always use fall protection when working where a fall hazard exists.
  • Position ladders to ensure their stability and to eliminate trip hazards.
  • Always face the ladder when climbing or working from a ladder.
  • Do not lean to reach items while standing on a ladder.
  • Always maintain three points of contact with the ladder when climbing.

Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf), Overview (powerpoint), Overview(pdf), Spanish Fatalgram (pdf)


Fatality #6 for Metal/Nonmetal Mining 2009

renewcomerLeave a comment

On April 14, 2009, a 38 – year old contractor carpenter with 8 years of experience was fatally injured at a cement plant under construction. While dismantling a section of scaffolding, the victim lost his balance and fell when one end of the metal pan on which he was standing shifted unexpectedly. As he fell backward, the victim’s safety lanyard slipped off the end of the horizontal scaffold to which he was tied.

Best Practices

  • Train persons to recognize the hazards associated with the type of scaffold being used and how to control or minimize those hazards.
  • Wear fall protection where there is a danger of falling.
  • Where possible anchor fall protection to permanent support structure.
  • Follow the manufacturer’s procedures for assembly and disassembly of scaffold systems.
  • Ensure that scaffolding is properly connected and braced to prevent side sway.
  • Prior to using scaffolding, inspect the structure to ensure that it has not been altered.

Click here for: MSHA Investigation Report (pdf), Overview (powerpoint), Overview (pdf)