On September 8, 2016, a 58-year old Haul Truck Operator with 23 years of experience was killed at a granite mine. The victim was operating a Caterpillar 773E haul truck and was returning to the pit to be loaded with shot rock. The truck veered from the right side of the haul road to the left and traveled over the berm at the top of the highwall. The truck landed upside down approximately 150 feet below. The victim was found outside the haul truck.
Best Practices
- Always wear a seat belt when operating a haul truck or mobile equipment.
- Conduct thorough, in depth task training to cover potential hazards.
- Monitor employees regularly to ensure seat belts are worn when operating mobile equipment.
- Emphasize that improperly worn seat belts can NOT provide the proper restraint to necessary to protect equipment operators in hazardous situations.
- Conduct pre-operational checks to identify defects that may affect the safe operation of equipment before being placed into service.
- Observe all speed limits, traffic rules, and ensure that grades on haulage roads are appropriate for haulage equipment being used. Maintain control and stay alert when operating mobile equipment.
- Provide and maintain adequate berms and other barriers of mid-axle height.
- Perform safety inspections that include braking systems and seat belts before operating equipment; promptly remove equipment from service if defects affecting safety are found.
Click here for: MSHA Preliminary Report (pdf), MSHA Investigation Report (pdf), Overview (pdf).
On August 9, 2016, a 33 year old Leadman Contractor, with 4 years of experience, was killed at a cement plant loadout. The victim was attempting to replace the lift cable pulleys on the barge loadout chute, when the anchor point for the temporary rigging separated from the loadout chute and it unexpectedly fell. The falling loadout chute caused the lift cables to tighten and the lift cables pinned the victim to the loadout chute causing fatal injuries.
On July 25, 2016, a 59 year old Excavator Operator, with 17 years of experience, was killed at a limestone quarry. Prior to the accident, the victim was loading shot rock into haul trucks. While waiting for the haul trucks to return, the victim was separating out over sized rocks when the cab of his excavator was struck by falling material from the highwall.
On June 27, 2016, a 61-year old Mine Superintendent, with 24 years of experience, was killed at a limestone quarry. The victim was building a ramp to the lower bench, was positioning his haul truck to dump a load of material near the edge of a highwall, and rolled backwards over the 90 foot highwall.
On June 3, 2016, a 24-year old haul truck operator, with 9 months of experience, and a 56-year old hydraulic excavator operator, with 6 years of experience, were killed at a sand and gravel operation. The two miners were working in a pit next to an abandoned roadway embankment, which partially bound an old pit. Waste clay and sand had been placed in the old pit for reclamation purposes. The embankment failed and the tailings and slurry engulfed both miners.
On May 10, 2016, a 46-year old maintenance man with 6 years of experience was fatally injured at a cement plant. The victim went to the top of the slurry tank to start the rake system. He fell 50 feet through a 3-foot by 4-foot opening in the walkway into the empty slurry tank below.
On April 11, 2016, a 61-year old dozer operator with 18 years of mining experience was fatally injured at a surface titanium ore mine. He had been leveling the haul roads into the pit with the dozer and was found lying approximately 30 feet in front of the dozer.
On April 9, 2016, a 25-year old plant operator with 4 years of mining experience was fatally injured at a surface copper ore mine. He was found unresponsive, kneeling with his face against a stainless steel flange that was connected to a high-density polyethylene pipe. The victim appeared to have received an electrical shock.
On March 22, 2016, a 42-year old lead man with 6 years of mining experience was fatally injured at a surface limestone mine when he was struck by fly rock from blasting operations. The lead man was parked in his pickup truck at a location to prevent others from accessing the blasting site. He was approximately 1,200 feet from the blast area.
On March 8, 2016, a 54-year old miner with 5 years of mining experience was killed at a surface sand and gravel operation. The miner backed his haul truck over a dump site and the driver was found at the bottom of the embankment, 60 feet below. The victim was found unresponsive and partially submerged in water. CPR was attempted, but the victim was not able to be resuscitated.