Metal/Nonmetal

Fatality #4 for Metal/Nonmetal Mining 2010

renewcomerLeave a comment

On March 24, 2010, a 63 year-old contract truck driver with 21 years of experience was fatally injured at a surface area of an underground salt mine. The victim was loading his truck under a 150 ton salt bin when it collapsed, falling onto the cab of the truck. A second victim working in the area received serious injuries.

Best Practices

  • Routinely examine metal structures for indications of weakened structural soundness (corrosion, fatigue cracks, bent/buckling beams, braces or columns, loose/missing connectors, broken welds, etc.).
  • Keep corrosive material spillage/build-up removed from metal structures.
  • Report all areas where indications of structural weakness are found.

Click here for: MSHA Investigation Report(pdf), Overview(powerpoint), Overview(pdf)

Fatality #2 for Metal/Nonmetal Mining 2010

renewcomerLeave a comment

On January 26, 2010, a 59 year-old purchasing manager with 5 years of experience was fatally injured at a cement operation. The victim was struck by an over-the-road tandem trailer truck. The truck had been waiting to unload. When the truck pulled forward, another truck driver observed the victim under the second trailer of the truck and immediately stopped the driver. The victim was holding a cell phone at the time of the accident.

Best Practices

  • Train all persons to stay clear of mobile equipment.
  • Be aware of the location and traffic patterns of mobile equipment in your work area.
  • Communicate with mobile equipment operators and ensure they acknowledge your presence.
  • Never approach mobile equipment until you receive confirmation from the operator indicating awareness of your presence.
  • Wear high visibility clothing when working around mobile equipment.
  • Avoid distractions, such as cell phones, when exposed to hazards.
  • Before moving mobile equipment, look in the direction of travel, use all mirrors, cameras, and installed proximity detection devices to ensure no persons are in the intended path.
  • Sound the horn to warn persons of intended movement and wait to give them time to move to a safe location.

Click here for: MSHA Investigation Report(pdf), Overview(powerpoint), Overview(pdf), Spanish Fatalgram(doc)

Fatality #1 for Metal/Nonmetal Mining 2010

renewcomerLeave a comment

On January 9, 2010, a 20 year-old contractor laborer with 21 weeks of experience was fatally injured at a copper operation. Two track excavators were being used to place a 400-foot long section of 24-inch diameter plastic pipe into a pond. To facilitate the installation process, the pipe was placed on top of an adjacent section of pipe that was previously placed on the plastic lining of the pond. During installation, the pipe being installed misaligned and the victim and two coworkers attempted to remove the end of this pipe from the top of the existing pipe. At that time, the end of the pipe shifted, hit a coworker, and then struck the victim. The victim fell to the ground and the pipe landed on him. The coworker was not injured.

Best Practices

  • Task train all persons prior to performing any work.
  • Always stay clear of suspended loads.
  • Use taglines of sufficient length to adequately protect persons from potential hazards.

Click here for: MSHA Investigation Report(pdf), Overview(powerpoint), Overview(pdf), Spanish Fatalgram(doc)

Fatality #16 for Metal/Nonmetal Mining 2009

renewcomerLeave a comment

On September 27, 2009, a 28 year-old truck driver with 2 years of experience was fatally injured at a copper operation. He was operating a 240-ton haul truck that left the haul road and climbed a berm, causing it to overturn and land on the haul road. The victim, who was not wearing a seat belt, fell from the cab of the truck.

Best Practices

  • Always wear a seat belt when operating a haul truck or mobile equipment.
  • Monitor employees regularly to ensure seat belts are worn when operating mobile equipment.
  • Maintain control and stay alert when operating mobile equipment.
  • Conduct pre-operational checks to identify and correct any defects that may affect the safe operation of self-propelled mobile equipment.

Click here for: MSHA Investigation Report(pdf), Overview(powerpoint), Overview(pdf)

Fatality #15 for Metal/Nonmetal Mining 2009

renewcomerLeave a comment

On September 15, 2009, a 59 year-old delivery driver with 14 years of experience was fatally injured at a sand and gravel operation. She parked off mine property and walked on site to deliver a package. The victim walked behind a front-end loader that backed over her.

Best Practices
  • Establish a visitor control policy that includes signs directing visitors to a safe location.
  • Train delivery persons to recognize work place hazards they could be exposed to while at the mine.
  • Always make sure equipment operators see you before entering any area where mobile equipment is operated. If possible, make eye contact with the equipment operator. When moving to a different area, inform
    the equipment operator before leaving the area.
  • Before moving mobile equipment, look in the direction of travel, use all mirrors, cameras, and installed proximity detection devices to ensure no one is in the intended path.
  • Ensure that all persons are clear before moving equipment. Sound your horn to warn unseen persons that you are about to move and wait a few moments to give them time to get to a safe location.
  • Ensure that backup alarms on mobile equipment are maintained and operational.

Click here for: MSHA Investigation Report(pdf), Overview(powerpoint), Overview(pdf)

Fatality #13 for Metal/Nonmetal Mining 2009

renewcomerLeave a comment

On July 2, 2009, a 52-year old mine owner with 34 years of experience was fatally injured at a surface dimension stone operation. He was working alone and was operating a walk behind masonry saw on a ledge. Apparently he was positioned between the saw and the edge when he tripped and fell. The victim and the saw went over the 9-foot ledge and the saw fell on him.

Best Practices
  • Identify all hazards and use appropriate controls to protect persons.
  • Ensure that operators are in a safe position and have control of their equipment at all times.
  • Keep workplaces free of tripping hazards.
  • Use barricades or railings at edges of drop-offs where persons are in danger of falling.
  • Equip walk behind masonry saws with devices to stop the engine if the operator can not maintain control of the equipment.
  • Design bench top stone cutting patterns so the saw operator is not positioned between the saw and the drop off edge.

Click here for: MSHA Investigation Report(pdf), Overview(powerpoint), Overview(pdf)

Fatality #12 for Metal/Nonmetal Mining 2009

renewcomerLeave a comment

On June 20, 2009, a 52-year old equipment oiler/greaser with 24 years of experience was fatally injured at an underground salt mine. He was cleaning equipment when a large roof fall occurred.

Best Practices
  • When ground conditions create a hazard to persons, install effective ground support before other work is permitted in the affected area.
  • Design, install, and maintain a support system to control the ground in places where persons work or travel.
  • Examine and test ground conditions in areas where work is to be performed prior to work commencing and as ground conditions warrant during the shift.
  • Be alert to any change of ground conditions.
  • Identify and scale loose ground from a location which will not expose persons to falling material.

Click here for: MSHA Investigation Report(pdf), Overview(powerpoint), Overview(pdf)

Fatality #11 for Metal/Nonmetal Mining 2009

renewcomerLeave a comment


On June 11, 2009, a 57-year old mechanic with 31 years of experience was fatally injured at an underground lead/zinc mine while checking for a hydraulic leak on a loader. The victim leaned into the ejector plate relief port in the back of the loader bucket. The ejector plate of the bucket was retracted, crushing him against the back of the bucket.

Best Practices
  • Train persons to recognize work place hazards.
  • Establish safe work procedures before a task is performed.
  • Securely block equipment and components against hazardous motion at all times while performing maintenance work.
  • If equipment and components are to be moved, always verify persons are aware and in a safe location prior to movement.
  • Consult and follow the manufacturer's recommended safe work procedures for the maintenance task.

 
Click here for: MSHA Investigation Report(pdf), Overview(powerpoint), Overview(pdf)

Fatality #10 for Metal/Nonmetal Mining 2009

renewcomerLeave a comment

On June 6, 2009, a 57-year old surface driller with 27 years of experience was fatally injured at a surface gold mine. The victim was drilling in a pit, exited the drill, and was walking in the drill area when he was struck by a flatbed truck as it backed up. The truck was in the area to collect drill cutting sample bags.

Best Practices
  • Before moving mobile equipment, look in the direction of travel, use all mirrors, cameras, and installed proximity detection devices to ensure no one is in the intended path.
  • Sound the horn to warn persons of movement and wait to give them time to get to a safe location.
  • Operate mobile equipment at reduced speeds in work areas.
  • Do not operate mobile equipment in reverse for extended distances when it is possible to travel forward.
  • Be aware of the location of mobile equipment in your work area before exiting your equipment.
  • Communicate with mobile equipment operators and ensure they acknowledge your presence.
  • Wear high visibility clothing when working around mobile equipment.
  • Train all miners to recognize work place hazards.

Click here for: MSHA Investigation Report(pdf), Overview(powerpoint), Overview(pdf)