Mining Fatalities

Fatality #12 for Coal 2018

renewcomerLeave a comment

c1812-fatalOn Thursday, November 29, 2018, a mechanic with 29 years of mining experience was severely injured when hydraulic pressure propelled a piece of metal out of a hydraulic fitting that he was examining, and the metal penetrated his head.  The miner died on December 30, 2018, as a result of his injuries.
Best Practices: 

  • Train miners to recognize hazards in pressurized systems before troubleshooting or performing work on such systems.
  • Consult and follow the manufacturer’s recommended safe work procedures.
  • Position yourself in a safe location, away from any potential sources of failure, while troubleshooting or testing pressurized systems.  When possible, examine and inspect hydraulic components while they are de-pressurized.
  • Remove pressure from the hydraulic system before beginning modifications or repairs.
  • Make modifications or repairs with proper components and parts that are adequately rated and specifically designed for such purposes.

Click here for: MSHA Preliminary Report (pdf), Final Report (pdf).

Fatality #11 for Coal 2018

renewcomerLeave a comment

c1811-fatal.jpgOn December 29, 2018, a 25-year old dredge operator, with 21 weeks of experience, was fatally injured at a coal mine. The victim drowned when the dredge he was operating sank.
Best Practices: 

  • Task train all persons to recognize all potential hazardous conditions and ensure they understand safe job procedures for elimination of the hazards before beginning work.
  • Examine work areas and equipment during the shift for hazards that may be created as a result of the work being performed.
  • Conduct a risk analysis before starting non-routine tasks to ensure that all hazards are evaluated and eliminated.
  • Establish procedures requiring persons to alert coworkers when they are in danger.

Click here for: MSHA Preliminary Report (pdf), Final Report (pdf).

Fatality #10 for Coal 2018

renewcomerLeave a comment

c1810-fatalOn Thursday, December 20, 2018, a mobile bridge carrier (MBC) operator, with 5 years and 21 weeks of mining experience, was fatally injured while operating his detached, remote-controlled machine during the mining process.  As the continuous haulage system pulled forward in preparation of mining, he was crushed between the coal rib and the No. 2 mobile bridge conveyor that was between both mobile bridge carriers.
Best Practices: 

  • Maintain communications between equipment operators of a continuous haulage system prior to starting or tramming any component of the system.
  • Institute and maintain a high level of equipment-specific training for all operators, which includes proper operator positioning during machine operation and also protocols for certain scenarios.
  • Do not position yourself in pinch-point areas while remotely operating equipment.  Ensure that equipment operators remain in the confines of the equipment cab, if equipped, while the machine is running.
  • Always perform thorough pre-operational examinations on mobile equipment to identify any defects that may affect the safe operation of equipment before it is placed into service.
  • Be familiar with the de-energizing switches on your machine and remote-control unit. “Panic-out” at the first sign of a hazardous situation.

Click here for: MSHA Preliminary Report (pdf), Final Report (pdf).

Fatality #9 for Coal 2018

renewcomerLeave a comment

On Tuesday, December 11, 2018, a 38-year-old miner was fatally injured at a surface coal mine.  The miner was operating a front-end loader to move shot rock near the toe of a 63-foot-high highwall.  A large portion of the highwall collapsed onto the front-end loader, crushing the operator cab and fatally injuring the miner.
Best Practices: 

  • Safely examine highwalls from as many perspectives as possible (bottom, sides, and top/crest).  Look for signs of cracking and other geologic features that could lead to instability and secure or remove hazardous conditions.  Conduct additional examinations as ground conditions warrant, especially during periods of changing weather conditions.
  • Follow the approved ground control plan at all times to ensure the safe control of highwalls.
  • Use mining methods that ensure highwall stability and safe working conditions and do not excavate the base of the highwall.
  • Train all miners to recognize hazardous highwall conditions.
  • Operate mobile equipment perpendicular to the highwall or with the operator’s cab positioned away from the highwall.  Ensure that miners work, travel, and operate mining equipment at safe distances from the highwall.
  • Use proper blasting techniques for forming highwalls and thoroughly examine the highwall after each blasting operation.

Click here for: MSHA Preliminary Report (pdf), Final Report (pdf).

Fatality #16 for Metal/Nonmetal Mining 2018

renewcomerLeave a comment

On November 11, 2018, a 45-year old Underground Technician with 4 years of experience was killed when the Load-Haul-Dump (LHD) machine he had been operating underground ran over him.

Best Practices

  • Ensure that all braking systems installed on mobile equipment function properly when the engine is operating and when it is shut off.  Do not depend on hydraulic systems to hold mobile equipment in a stationary position
  • Block LHDs against motion by setting the parking brake. Turn the tires toward the rib and lower the bucket onto the floor.  Use wheel chocks when parking mobile equipment.
  • Conduct adequate pre-operational examinations on all self-propelled mobile equipment and promptly correct any defects affecting safety.
  • Before beginning a task, miners should discuss the work procedures, identify all possible hazards, and ensure steps are taken to safely perform the task.

Click here for: MSHA Preliminary Report (pdf), Final Report (pdf).

Fatality #15 for Metal/Nonmetal Mining 2018

renewcomerLeave a comment

On November 3, 2018, a 44-year old shift supervisor with 3 years of experience was killed when a loaded Caterpillar 785B haul truck ran over her pickup truck at the crusher site.

Best Practices

  • Communicate and verify with all equipment operators your planned movements and location upon entering a work area.
  • Ensure all persons are trained to recognize workplace hazards. Specifically, train equipment operators on the limited visibility and blind spot areas that are inherent to the operation of large equipment. Do not drive or park smaller vehicles in mobile equipment’s potential path of movement.
  • Instruct all operators on the importance of using flags or strobe lights on the cabs of their vehicles to make haulage truck operators aware of their location.
  • Install and maintain collision avoidance/warning technologies on mobile equipment.

Click here for: MSHA Preliminary Report (pdf), Final Report (pdf).

Fatality #14 for Metal/Nonmetal Mining 2018

renewcomerLeave a comment

On October 25, 2018, a 42-year old miner with 13 years of experience was killed when the back fell while he was loading explosives in the face.  The back was comprised of cemented backfill and weighed approximately 150 tons.

Best Practices

  • Implement a robust quality control program to ensure cemented rock fill is mixed and placed properly, especially when it constitutes the main method of ground support.
  • Examine and test ground conditions in areas where work is to be performed prior to work commencing and as warranted during the shift.  Be alert for changing conditions, especially after activities that could cause back/roof disturbance.
  • When ground conditions create a hazard to persons, install additional ground support before other work is permitted in the affected area.
  • Task train all persons to recognize all potentially hazardous conditions and ensure they understand safe job procedures for elimination of the hazards.

Click here for: MSHA Preliminary Report (pdf), Final Report (pdf).

Fatality #13 for Metal/Nonmetal Mining 2018

renewcomerLeave a comment

On October 25, 2018, a 29-year old laborer with 9 weeks of experience was fatally injured when the truck he was driving veered off the haul road and climbed an embankment, causing the truck to overturn.  He was not wearing a seatbelt.

Best Practices

  • Always wear a seat belt when operating mobile equipment.
  • Operate mobile equipment at speeds consistent with the conditions of roadways, tracks, grades, clearance, visibility, curves, and traffic.
  • Maintain control and stay alert when operating mobile equipment, especially vehicles with high centers of gravity.

Click here for: MSHA Preliminary Report (pdf), Final Report (pdf).

Fatality #8 for Coal 2018

renewcomerLeave a comment

On Wednesday, October 17, 2018, a 33-year-old auger helper with 3 days of total surface mining experience received fatal injuries during auger mining activities. The victim was attempting to move a section of auger steel by using the onboard crane when he was struck in the chest.
Best Practices: 

  • Maintain equipment in safe operating condition. Excessive pressure in a hydraulic circuit can drastically alter the control of booms, etc., creating serious hazards.
  • Establish policies and procedures for auger mining including, safe work procedures for removing auger steel from the auger tray.
  • Task train miners to recognize all potential hazards and understand safe job procedures before beginning work.
  • Monitor personnel routinely to ensure safe work procedures are being followed. Unauthorized persons should be kept clear of the work area.
  • Do not place yourself in a position that exposes you to hazards. Stand clear of suspended loads having the potential of becoming off-balanced while being moved.

Click here for: MSHA Preliminary Report (pdf), Final Report (pdf).

Fatality #12 for Metal/Nonmetal Mining 2018

renewcomerLeave a comment

On October 19, 2018, a 63-year old quarry manager, with 17 years of experience, was fatally injured when he lost control of the haul truck he was driving.  The victim was operating a haul truck down a steep grade and traveled through a berm and over a short drop-off.  The victim was not wearing a seat belt.

Best Practices

  • Always wear seat belts when operating mobile equipment.
  • Maintain control and stay alert when operating mobile equipment.
  • Conduct adequate pre-operational checks and correct any defects affecting safety in a timely manner prior to operating mobile equipment.
  • Operate mobile equipment at speeds consistent with the conditions of roadways, tracks, grades, clearance, visibility, curves, and traffic.
  • Ensure that berms are adequate for the vehicles present on site.  Among other things, they should be constructed of appropriate materials, be of adequate height, and be built on firm ground.

Click here for: MSHA Preliminary Report (pdf), Final Report (pdf).